SMART HALL ROAD
FEATURED CATEGORIES
Visit our shop to see amazing PRODUCTS.
MOST POPULAR IN NEON
ARDUINO BOARDS
BEST SELLING PRODUCTS
WoodMart is a powerful eCommerce theme for WordPress.
Arduino Uno R3 Dip With Arduino Logo In Pakistan
Original price was: ₨1900.₨1650Current price is: ₨1650.
ARRIVALS
NEW ARRIVALS
we have everything that you need
CH341A Programmer For Dish TV Laptop Memory IC in Pakistan
LCD2004 LCD Screen 2004 Display Module 5V Blue Screen For Arduino In Pakistan
2004A 20X4 Character Blue Color LCD Display is designed to display letters, numbers, symbols, and dot matrix. This 2004A LCD Display can display 4 lines of 20 characters. Support 4-bit and 8-bit data transfer modes. Offers 5×7 matrix + cursor display mode. Providing display data buffer DDRAM, character generator CGROM, and CGRAM. CGRAM can be used to store up to eight 5×8 dot matrix character font data graphic own definition. Provides a rich instruction set: clear display, cursor back to the origin, display on / off, the cursor on / off, display character blink, cursor shift, display shift, and so on.
Mini Hygrometer In Pakistan
This is Mini Hygrometer has dual readouts in one easy-to-use unit. This Hygrometer is best choice as compare to HTC 1 Meter and has a convenient size and quality construction. This Hygrometer is suitable for panel mounting. This digital incubator hygrometer humidity meter00 is with dependable reading with high accuracy. This incubator digital meter is with a remote sensor with 20cm of cable. Best FY12 incubator meter with probe, the display can be mounted outside of any object wheich you want to measure, while the sensor is inside getting an accurate reading.
DRV8825 Stepper Motor Driver with Aluminum Heat Sink In Pakistan
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 micro-stepping bipolar stepper motor driver. The Stepper Driver module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board, so it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 Arduino stepper motor controller features adjustable current limiting, over-current, and over-temperature protection, and six micro-step resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
DVK512 Raspberry Pi Expansion Board in Pakistan
MOSFET IGBT DRIVER TLP250 In Pakistan
The pin layout of TLP250 is given below. It is clearly shown in the figure that led at the input stage and the photodetector diode at the output stage is used to provide isolation between input and output. Pin numbers 1 and 4 are not connected to any point. Hence they are not in use. Pin 2 is an anode point of the input stage light-emitting diode and pin 3 is the cathode point of the input stage. Input is provided to pins 2 and 3. Pin 8 is for the supply connection. Pin 5 is for the ground of the power supply.
3S 40A BMS 11.1V 12.6V 18650 Lithium Battery Protection Board with 100mA Balancing Feature in Pakistan
The 3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module comes with recovery function-AUTO Recovery and Integrated 10 low load resistance MOS tube. It provides a continuous discharge of 40A, 100mA balanced current, for electric drill/sprayer/LED lights/low power inverter.  (if the cooling environment is not good, please reduce the load current use).The Scope of Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, a polymer lithium battery) where Charging voltage can be range between 16.8V to 18.1V The board operates smoothly with Continuous charge current of (upper limit): 20A. The balanced version is suitable for starting current below 80A, power 135W below the drill (with balance).
Xh-M603 Battery Charging Control Module DC 12V-24v Voltage Charging Discharge Monitor Relay Switch Battery Protection Board in Pakistan
The XH-M603 is a PCB control module used to charge lithium batteries, Lead-acid, nickel-cadmium, nickel-metal hydride, lithium-ion, and polymer. You can assemble your own Lithium battery charger by using this charger module. The 12v-24v Battery Protection Module can also be used for solar panels. The XH-M603 module is perfect for building a battery charging station, offering a range of protection features and easy-to-set min/max charging voltages. As soon as the desired battery float voltage is reached, the charging circuit is disconnected.
A4988 Stepper Motor Driver In Pakistan
The A4988 driver Stepper Motor Driver is available in Pakistan and this is a complete micro-stepping motor driver with built-in converter, easy to operate. It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling). A4988 driver Stepper Motor Driver includes a fixed off-time current regulator, the regulator can be in slow or mixed decay mode. The converter is the key to the easy implementation of the A4988.
1Meter 16mm Heat Shrink Sleeve Heat Shrink Tube In Pakistan
1Meter 16mm Heat Shrink Sleeve Industrial Grade WOER (HST) is excellent for insulation. They have exceptional insulation characteristics, excellent stress control properties; long-term weather and regular wear and tear resistance, ease of installation, and reliable performance even in harshest of the situations. These High performance 2:1 heat shrink material tubes, bundles, and protects cables wire, and hoses are used for a wide range of DIY applications. It is used extensively for cable and wire harnessing, strain relief, insulation, color coding, identification, and protection.
30Cm Pin to Pin DuPont Line 40pcs Jumper Wire Cable In Pakistan
ESP32 CAM MB WIFI Bluetooth Development Board Micro USB Interface CH340G USB to Serial Port And OV2640 Camera Module In Pakistan
The HK-ESP32-CAM-MB module is a small camera module with a size of 39.8*27*. This module can work independently as the smallest system. A new WiFi+Bluetooth dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz. Ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleHK-ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions.