Nodemcu WROOM ESP32 Wifi Based Microcontroller Development Board In Pakistan
ESP32 is a prototyping board that is the work of the Shanghai-based company Espressif Systems. It incorporates the ESP32, a microprocessor tailored toward wearable electronics and IoT. It boasts integrated Wi-Fi and Bluetooth, along with an array of inbuilt antenna switches, and ultra-low power consumption. The company released the ESP8266 chip in 2014. Costing only a few dollars, this small chip is able to bridge an Arduino with a WiFi network, solving many issues that early IoT pioneers experienced.
₨1100
ESP32 is a prototyping board that is the work of the Shanghai-based company Espressif Systems. It incorporates the ESP32, a microprocessor tailored toward wearable electronics and IoT. It boasts integrated Wi-Fi and Bluetooth, along with an array of inbuilt antenna switches, and ultra-low power consumption. The company released the ESP8266 chip in 2014. Costing only a few dollars, this small chip is able to bridge an Arduino with a WiFi network, solving many issues that early IoT pioneers experienced.
Specification of Nodemcu WROOM ESP32 Wifi Based Microcontroller Development Board:
- Current – Receiving: 80 mA.
- Voltage – Supply: 2.2 V ~ 3.6 V.
- Current – Transmitting: 80 mA.
- Number of pins supported: 30
- Data Rate: 54 Mbps.
- Frequency: 2.4 GHz.
- Mounting Type: Surface Mount.
- Operating Temperature: -40°C ~ 85°C.
- Power – Output: 16.5dBm.
- Protocol: 802.11b/g/n/d/e/i.
- RF Family/Standard: WiFi.
- Sensitivity: -98dBm.
- Serial Interfaces: I²C, I²S, SPI, UART.
- Integrated 520 KB SRAM.
- Hybrid Wi-FI & Bluetooth.
- High level of integration.
- Ultra-low-power management.
- 4 MB Flash.
- On-board PCB antenna.
Package Include:
- 1 x Nodemcu WROOM ESP32 Wifi Based Microcontroller Development Board In Pakistan
Based on 0 reviews
Be the first to review “Nodemcu WROOM ESP32 Wifi Based Microcontroller Development Board In Pakistan”
Related products
-
IOT Boards
ESP01 ESP8266 WiFi Module In Pakistan
The ESP 01 or ESP8266 WiFi Module is a self-contained SOC. ESP8266 serial module has integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The esp8266 wifi module Arduino is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The esp 01 connect to wifi module is an extremely cost-effective board with a huge, and ever-growing, community.
SKU: SH22 -
IOT Boards
ESP-12 ESP8266-12e Wifi Module Wireless IoT Board Module In Pakistan
The Latest ESP-12E ESP8266 Wifi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks. It is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with full TCP/IP stack and MCU (Micro Controller Unit) capability.
SKU: SH26 -
IOT Boards
38 Pin Nodemcu ESP32S Microcontroller WiFi & Bluetooth ESP WROOM 32 Development Board Module In Pakistan
IOT Boards38 Pin Nodemcu ESP32S Microcontroller WiFi & Bluetooth ESP WROOM 32 Development Board Module In Pakistan
This is an IoT board that can be used as a client mode where collected sensor data can be sent to the server using WiFi protocol. Or, used as the main server to control Led, relay or any output that is connected to this board. This board is fully supported by the Arduino IDE program.
SKU: SH21 -
IOT Boards
ESP32 CAM MB WIFI Bluetooth Development Board Micro USB Interface CH340G USB to Serial Port And OV2640 Camera Module In Pakistan
IOT BoardsESP32 CAM MB WIFI Bluetooth Development Board Micro USB Interface CH340G USB to Serial Port And OV2640 Camera Module In Pakistan
The HK-ESP32-CAM-MB module is a small camera module with a size of 39.8*27*. This module can work independently as the smallest system. A new WiFi+Bluetooth dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz. Ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleHK-ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions.
SKU: SH25 -
IOT Boards
ESP32-CAM WiFi + Bluetooth Camera Module Development Board ESP32 With Camera Module OV2640 For Arduino In Pakistan
IOT BoardsESP32-CAM WiFi + Bluetooth Camera Module Development Board ESP32 With Camera Module OV2640 For Arduino In Pakistan
ESP32-CAM is a WIFI+ Bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.ESP integrates WiFi, traditional Bluetooth, and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc. Fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other hosts MCUs to add networking capabilities to existing devices.ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications. It is an ideal solution for IoT applications.
SKU: SH24
There are no reviews yet.