Soil Moisture Sensor
₨140 Original price was: ₨140.₨125Current price is: ₨125.
BMS 3S 60A Battery Management System With Protection
₨400 Original price was: ₨400.₨370Current price is: ₨370.
-
PCB BMS Protection Board
-
Li-ion Lithium Battery Charger Protection Board
-
Balance Charging Module
SKU:
SH-401
Categories: BMS Circuit, Sensor & Modules, Voltage Regulator Module
Description
3S 60A Protection Charging Board Product Description
Product parameters:
Charging voltage : 12.6V-13V
Maximum working current : 60A ( heat dissipation conditions are very good )
Continuous charging current ( upper limit ) : 20A
Continuous discharge current ( upper limit ) : 40A
Overcurrent protection : 125A
Overcharge detection : 12.8V ( for 3 groups of batteries )
Overcharge release : 12.3V ( for 3 groups of batteries Over discharge detection : 2.4V ( for 1 group of batteries)
Over discharge release : 3.0V ( for 1 group of batteries )
Short circuit protection : Yes
Working temperature : -40℃ ~ +85℃
Storage conditions : -40℃ ~ +125℃
Reviews (0)
Be the first to review “BMS 3S 60A Battery Management System With Protection” Cancel reply
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
1 Channel Relay Module For Arduino In Pakistan
₨130
Channel 5V Arduino Relay Module for Arduino PIC AVR DSP ARM. Single-channel relay, a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and so on can control it. The 5V relay module circuit, each one needs 15mA-20mA driver current and equipped with high current relay: DC 30V / 10A, AC 250V / 10A. This one channel module has a standard interface that can be compatible with a microcontroller.
5 Channel TCRT5000 IR Array Tracking Sensor Module In Pakistan
₨450
5 Channel TCRT5000 IR Array Tracking Sensor Module is a sensor board designed for use with line follower robots. This IR sensor module has been sufficient to meet the frequent task of tracking, but also with the infrared distance sensor and touch detection sensor. This TCR T5000 array unique makes your robot design able to adapt to the situation easily. It is specifically designed as a black line especially suitable for the complex of the black and white line, cross black and white line detection. This high-quality sensor module has 6 roads high sensitivity infrared sensor (5 escapes patrol, 1 road), to the recognition of black and white line accurately.
Arduino 4 Channel Relay Module Board In Pakistan
₨400
This is a 5V 4-channel relay interface board, and each channel needs a 15-20mA driver current. This 4-way relay module can be used to control various appliances and equipment with large current. This four-channel relay module is equipped with high-current relays that work under AC250V 10A or DC30V 10A. 5 volts relay driver module has a standard interface that can be controlled directly by the microcontroller. This relay module board allows a wide range of microcontrollers such as Arduino, AVR, PIC, ARM with digital outputs to control larger loads and devices like AC or DC Motors, electromagnets, solenoids, and incandescent light bulbs.
AT-09 HM10 4.0 BLE Bluetooth Module In Pakistan
₨600
This AT-09 HM10 / HM-10 4.0 BLE Bluetooth Serial CC2540 CC2541 Module For IOS 6/Android 4.3 contains a BLE chip (a CC2540/CC2541). This AT-09 HM-10 Bluetooth Module allows performing serial communication with the BLE chip thanks to an Rx and a Tx pin. This 4.0 Bluetooth Serial Module is also very similar to the HM-10 module and is also compatible with it. So if you have some experience with the latter, you will get started quickly with the AT-09.
Digital LDR Sensor Module In Pakistan
₨120
The Digital Light Dependent Resistor LDR Sensor Module is used to detect the presence of light / measuring the intensity of light. The output of the LDR module goes high in the presence of light and it becomes low in the absence of light. You can adjust the threshold (sensitivity) of the digital output by tuning the onboard variable resistor (potentiometer). Simple usage as it is the digital output, so you will know is the light present and decide what to do with it.LDR photoresistor sensor module comes with an M3 mounting hole for ease of attaching it to an object. Onboard, it provides an LDR, high sensitivity and commonly being used for light detection.
HC-SR04 HC SR04 Arduino Ultrasonic Sensor In Pakistan
₨190
HC-SR501 PIR Motion Sensor Module in Pakistan
₨180
The PIR Motion Sensor Detector Module HC-SR501 allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor’s range. It is often referred to using “PIR”, “Pyroelectric”, “Passive Infrared” and “IR Motion” sensor. The module has an onboard pyroelectric sensor, conditioning circuitry, and a dome-shaped Fresnel lens. It has a delay time adjustment Potentiometer and sensitivity adjustment Potentiometer. Repeat Trigger Selection solderable Jumper is also available.
IR Infrared Obstacle Avoidance Sensor Module In Pakistan
₨130
The Obstacle Detector sensor module is perfectly adaptable to the environment light, IR Object Avoidance Sensor has a pair of infrared transmitting and receiving tubes; transmitting tube emits infrared in a certain frequency, when detecting direction meets with obstacles(reflecting surface), reflected infrared will be received by the receiving tube; after the comparator circuit processing, the green indicator will light up, at the same time signal output interface to output digital signal(1 low-level signal). Users can adjust the detection distance through the potentiometer knob, effective distance range 2~30cm and working voltage is 3.3V to 5V. The Obstacle Avoidance module LM393 can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, black and white line tracking, and so on many occasions.

Reviews
There are no reviews yet.