Soil Moisture Sensor
Original price was: ₨140.₨125Current price is: ₨125.
-8%
BMS 3S 60A Battery Management System With Protection
Original price was: ₨400.₨370Current price is: ₨370.
-
PCB BMS Protection Board
-
Li-ion Lithium Battery Charger Protection Board
-
Balance Charging Module
Description
3S 60A Protection Charging Board Product Description
Product parameters:
Charging voltage : 12.6V-13V
Maximum working current : 60A ( heat dissipation conditions are very good )
Continuous charging current ( upper limit ) : 20A
Continuous discharge current ( upper limit ) : 40A
Overcurrent protection : 125A
Overcharge detection : 12.8V ( for 3 groups of batteries )
Overcharge release : 12.3V ( for 3 groups of batteries Over discharge detection : 2.4V ( for 1 group of batteries)
Over discharge release : 3.0V ( for 1 group of batteries )
Short circuit protection : Yes
Working temperature : -40℃ ~ +85℃
Storage conditions : -40℃ ~ +125℃
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
2 Channel Relay Module For Arduino In Pakistan
2 Channel Relay Module Relay Board Arduino Relay Module With Optocoupler allows a wide range of microcontrollers such as Arduino, AVR, PIC, ARM with digital outputs to control larger loads and devices like AC or DC Motors, electromagnets, solenoids, and incandescent light bulbs. 4–channel relay interface board, and each channel needs a 15-20mA driver current. It can be used to control various appliance
Arduino 4 Channel Relay Module Board In Pakistan
This is a 5V 4-channel relay interface board, and each channel needs a 15-20mA driver current. This 4-way relay module can be used to control various appliances and equipment with large current. This four-channel relay module is equipped with high-current relays that work under AC250V 10A or DC30V 10A. 5 volts relay driver module has a standard interface that can be controlled directly by the microcontroller. This relay module board allows a wide range of microcontrollers such as Arduino, AVR, PIC, ARM with digital outputs to control larger loads and devices like AC or DC Motors, electromagnets, solenoids, and incandescent light bulbs.
DS18B20 Waterproof Temperature Sensor Digital Temperature Probe In Pakistan
These temperature sensors work great with any microcontroller using any single digital pin. We can also connect multiple ones to the same pin. Each one has a unique 64 bits ID burn. It is useable with 3 to 5 volts systems. There is one downside of this sensor is they use the Dallas 1-wire protocol, and which is somewhat complex. This protocol requires a bunch of code to parse out the communication. When you are using this temperature sensor with a microcontroller put a 4.7K resistor to the sensing pin.
HC-SR501 PIR Motion Sensor Module in Pakistan
The PIR Motion Sensor Detector Module HC-SR501 allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor’s range. It is often referred to using “PIR”, “Pyroelectric”, “Passive Infrared” and “IR Motion” sensor. The module has an onboard pyroelectric sensor, conditioning circuitry, and a dome-shaped Fresnel lens. It has a delay time adjustment Potentiometer and sensitivity adjustment Potentiometer. Repeat Trigger Selection solderable Jumper is also available.
ir-08h Infrared Obstacle avoidance sensor module KY032 for Arduino
Arduino KY-032 Obstacle avoidance sensor modules Infrared Obstacle Avoidance Sensor returns a signal when it detects an object in range. The range of the sensor is around 2-40 cm distance. It operates at 3.5 to 5 volts at around 20 milliamps. The Obstacle Avoidance Sensors usually come in two types – with 3 and 4 pins. This is the 4 pin version Sensor Module and has an optional Enable pin. An infrared obstacle avoidance sensor is designed to detect obstacles or the difference in reflective services.
PIR8 Controller 12V 24V PIR Sensor LED Dimmer Switch Motion Timer in Pakistan
Infrared detection controller, adopt an infrared detection way to control load switch.LED Lighting motion sensing switch which provides 1 to 10 minute OFF delay timing function. The sensor switch activates ON when a body in motion enters the field of view with an ON time hold that is adjustable from 1 to 10 minutes after motion has ceasedPIR (Passive InfraRed, IR) sensor has an effective range of 16 feet and diminished sensing of a moving human body to 26 feet.
Ultrasonic Distance Sensor Mounting Bracket Holder Stand In Pakistan
Mounting Bracket Holder Stand is specifically designed for the HC-SR04 Ultrasonic Sensor Module. With this ultrasonic sensor you can attach the le to your application such as small robots or DIY projects very quickly and conveniently. This best mount bracket is made from good quality Acrylic. This mounting holder has mounting holes of a diameter of 3.8mm. Use this Arduino distance measuring sensor to easily attach your ultrasonic distance sensor to your robots, onto a servo for panning, and anywhere else you’d like. 90 degree mounting with 3 screw holes at the base and 4 screw holes for the ultrasonic sensor itself.
Reviews
There are no reviews yet.