Soil Moisture Sensor
Original price was: ₨140.₨125Current price is: ₨125.
-8%
BMS 3S 60A Battery Management System With Protection
Original price was: ₨400.₨370Current price is: ₨370.
-
PCB BMS Protection Board
-
Li-ion Lithium Battery Charger Protection Board
-
Balance Charging Module
Description
3S 60A Protection Charging Board Product Description
Product parameters:
Charging voltage : 12.6V-13V
Maximum working current : 60A ( heat dissipation conditions are very good )
Continuous charging current ( upper limit ) : 20A
Continuous discharge current ( upper limit ) : 40A
Overcurrent protection : 125A
Overcharge detection : 12.8V ( for 3 groups of batteries )
Overcharge release : 12.3V ( for 3 groups of batteries Over discharge detection : 2.4V ( for 1 group of batteries)
Over discharge release : 3.0V ( for 1 group of batteries )
Short circuit protection : Yes
Working temperature : -40℃ ~ +85℃
Storage conditions : -40℃ ~ +125℃
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
1 Channel Relay Module For Arduino In Pakistan
Channel 5V Arduino Relay Module for Arduino PIC AVR DSP ARM. Single-channel relay, a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and so on can control it. The 5V relay module circuit, each one needs 15mA-20mA driver current and equipped with high current relay: DC 30V / 10A, AC 250V / 10A. This one channel module has a standard interface that can be compatible with a microcontroller.
2 Channel Relay Module For Arduino In Pakistan
2 Channel Relay Module Relay Board Arduino Relay Module With Optocoupler allows a wide range of microcontrollers such as Arduino, AVR, PIC, ARM with digital outputs to control larger loads and devices like AC or DC Motors, electromagnets, solenoids, and incandescent light bulbs. 4–channel relay interface board, and each channel needs a 15-20mA driver current. It can be used to control various appliance
5 Channel TCRT5000 IR Array Tracking Sensor Module In Pakistan
5 Channel TCRT5000 IR Array Tracking Sensor Module is a sensor board designed for use with line follower robots. This IR sensor module has been sufficient to meet the frequent task of tracking, but also with the infrared distance sensor and touch detection sensor. This TCR T5000 array unique makes your robot design able to adapt to the situation easily. It is specifically designed as a black line especially suitable for the complex of the black and white line, cross black and white line detection. This high-quality sensor module has 6 roads high sensitivity infrared sensor (5 escapes patrol, 1 road), to the recognition of black and white line accurately.
DS18B20 Waterproof Temperature Sensor Digital Temperature Probe In Pakistan
These temperature sensors work great with any microcontroller using any single digital pin. We can also connect multiple ones to the same pin. Each one has a unique 64 bits ID burn. It is useable with 3 to 5 volts systems. There is one downside of this sensor is they use the Dallas 1-wire protocol, and which is somewhat complex. This protocol requires a bunch of code to parse out the communication. When you are using this temperature sensor with a microcontroller put a 4.7K resistor to the sensing pin.
IR Infrared Obstacle Avoidance Sensor Module In Pakistan
The Obstacle Detector sensor module is perfectly adaptable to the environment light, IR Object Avoidance Sensor has a pair of infrared transmitting and receiving tubes; transmitting tube emits infrared in a certain frequency, when detecting direction meets with obstacles(reflecting surface), reflected infrared will be received by the receiving tube; after the comparator circuit processing, the green indicator will light up, at the same time signal output interface to output digital signal(1 low-level signal). Users can adjust the detection distance through the potentiometer knob, effective distance range 2~30cm and working voltage is 3.3V to 5V. The Obstacle Avoidance module LM393 can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, black and white line tracking, and so on many occasions.
ir-08h Infrared Obstacle avoidance sensor module KY032 for Arduino
Arduino KY-032 Obstacle avoidance sensor modules Infrared Obstacle Avoidance Sensor returns a signal when it detects an object in range. The range of the sensor is around 2-40 cm distance. It operates at 3.5 to 5 volts at around 20 milliamps. The Obstacle Avoidance Sensors usually come in two types – with 3 and 4 pins. This is the 4 pin version Sensor Module and has an optional Enable pin. An infrared obstacle avoidance sensor is designed to detect obstacles or the difference in reflective services.
PCF8574 IIC I2C Serial Interface Adapter Module IIC I2C LCD Module In Pakistan
This board has a PCF8574 I2C chip that converts I2C serial data to parallel data for the LCD display. There are many examples on the internet for using this board with Arduino. Do a search for “Arduino LCD PCF8574“. The I2C address is 0x3F by default, but this can be changed via 3 solder jumpers provided on the board. This allows up to 3 LCD displays to be controlled via a single I2C bus (giving each one it’s own address).
Reviews
There are no reviews yet.