Soil Moisture Sensor
Original price was: ₨140.₨125Current price is: ₨125.
-8%
BMS 3S 60A Battery Management System With Protection
Original price was: ₨400.₨370Current price is: ₨370.
-
PCB BMS Protection Board
-
Li-ion Lithium Battery Charger Protection Board
-
Balance Charging Module
Description
3S 60A Protection Charging Board Product Description
Product parameters:
Charging voltage : 12.6V-13V
Maximum working current : 60A ( heat dissipation conditions are very good )
Continuous charging current ( upper limit ) : 20A
Continuous discharge current ( upper limit ) : 40A
Overcurrent protection : 125A
Overcharge detection : 12.8V ( for 3 groups of batteries )
Overcharge release : 12.3V ( for 3 groups of batteries Over discharge detection : 2.4V ( for 1 group of batteries)
Over discharge release : 3.0V ( for 1 group of batteries )
Short circuit protection : Yes
Working temperature : -40℃ ~ +85℃
Storage conditions : -40℃ ~ +125℃
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
2 Channel Relay Module For Arduino In Pakistan
2 Channel Relay Module Relay Board Arduino Relay Module With Optocoupler allows a wide range of microcontrollers such as Arduino, AVR, PIC, ARM with digital outputs to control larger loads and devices like AC or DC Motors, electromagnets, solenoids, and incandescent light bulbs. 4–channel relay interface board, and each channel needs a 15-20mA driver current. It can be used to control various appliance
AT-09 HM10 4.0 BLE Bluetooth Module In Pakistan
This AT-09 HM10 / HM-10 4.0 BLE Bluetooth Serial CC2540 CC2541 Module For IOS 6/Android 4.3 contains a BLE chip (a CC2540/CC2541). This AT-09 HM-10 Bluetooth Module allows performing serial communication with the BLE chip thanks to an Rx and a Tx pin. This 4.0 Bluetooth Serial Module is also very similar to the HM-10 module and is also compatible with it. So if you have some experience with the latter, you will get started quickly with the AT-09.
HC-SR501 PIR Motion Sensor Module in Pakistan
The PIR Motion Sensor Detector Module HC-SR501 allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor’s range. It is often referred to using “PIR”, “Pyroelectric”, “Passive Infrared” and “IR Motion” sensor. The module has an onboard pyroelectric sensor, conditioning circuitry, and a dome-shaped Fresnel lens. It has a delay time adjustment Potentiometer and sensitivity adjustment Potentiometer. Repeat Trigger Selection solderable Jumper is also available.
TTP223 Capacitive Touch Sensor Switch Button Module
This Arduino touch sensor module based on the dedicated TTP223 touch sensor IC. The TTP223 capacitive touch switch provides a single integrated touch sensing area of 11 x 10.5mm with a sensor range of ~5mm. An on-board LED will give a visual indication of when the sensor is triggered. When triggered the module's output will switch from its idle low state to high (default operation). Solder jumpers allow for reconfiguring its mode of operation to be either active low or toggle output.
Ultrasonic Distance Sensor Mounting Bracket Holder Stand In Pakistan
Mounting Bracket Holder Stand is specifically designed for the HC-SR04 Ultrasonic Sensor Module. With this ultrasonic sensor you can attach the le to your application such as small robots or DIY projects very quickly and conveniently. This best mount bracket is made from good quality Acrylic. This mounting holder has mounting holes of a diameter of 3.8mm. Use this Arduino distance measuring sensor to easily attach your ultrasonic distance sensor to your robots, onto a servo for panning, and anywhere else you’d like. 90 degree mounting with 3 screw holes at the base and 4 screw holes for the ultrasonic sensor itself.
Reviews
There are no reviews yet.