Arduino Pro Mini 5V 16Mhz ATMEGA328 Board In Pakistan
The Arduino Pro Mini 5v 16mhz ATMEGA328 is intended for advanced users who require flexibility, low cost, and small size. It comes with a minimum of components (no onboard USB or pin headers) to keep the cost down. Be sure to provide the correct power and use components whose operating voltage matches that of the board.
₨1000
The Arduino Pro Mini 5v 16mhz ATMEGA328 is intended for advanced users who require flexibility, low cost, and small size. It comes with a minimum of components (no onboard USB or pin headers) to keep the cost down. Be sure to provide the correct power and use components whose operating voltage matches that of the board.
Specification of Arduino Pro Mini 5V 16Mhz ATMEGA328 Board:
- 131 Powerful Instructions – Most Single Clock Cycle Execution
- Up to 20 MIPS Throughput at 20 MHz
- Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
- One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
- Real-Time Counter with Separate Oscillator
- Six PWM Channels
- 8-channel 10-bit ADC in TQFP and QFN/MLF package
- Programmable Watchdog Timer with Separate On-chip Oscillator
- On-chip Analog Comparator
- 23 Programmable I/O Lines
Package Include:
- 1 x Arduino Pro Mini 5V 16Mhz ATMEGA328 Board In Pakistan
| Weight | 0.1 kg |
|---|
Based on 0 reviews
Be the first to review “Arduino Pro Mini 5V 16Mhz ATMEGA328 Board In Pakistan”
Related products
-
Arduino Boards
Arduino Pro Mini 3.3V 8Mhz ATMEGA328P Board in Pakistan
Arduino Pro Mini ATMEGA328P is a 3.3V Arduino (Official Version) running the 8MHz bootloader. Arduino Pro Mini ATMEGA328P comes with connectors so that you can solder connectors or wires with any orientation you need. We recommend the first-time Arduino users start with the Uno R3. It’s a great board that will get you up and be running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off-board.
SKU: SH10 -
Arduino Boards
Arduino Nano V3 ATmega328P Development Board In Pakistan
Arduino Nano V3 is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3. x). Arduino Nano board has more or less the same functionality as the Arduino UNO but in a different package. Arduino Nano programming module lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.
SKU: SH07 -
Arduino Boards
Arduino Uno R3 Dip Without Arduino Logo In Pakistan
Arduino Uno R3 is a micro controller-based development board. Arduino UNO and other boards can read inputs – light on a sensor, a finger on a button, or a Twitter message – and turn it into an output – activating a motor, turning on an LED, publishing something online by utilizing this R3 kit. You can tell your Arduino UNO r3 what to do by sending a set of instructions to the micro controller on the board. To do so you use the Arduino programming language (based on Wiring), and the Arduino Software (IDE), based on Processing.
SKU: SH01 -
Arduino Boards
Arduino Uno R3 SMD Board In Pakistan
This is improved Arduino Uno R3 is one of the latest versions of Arduino Uno with an onboard CH340 USB – serial converter chip. ArduinoUNoR3 provides you with a cheaper opportunity to get started with Arduino boards. The microcontroller model of this board is the same as the original one (Atmega328). The only difference between microcontrollers is the package. The original one has a DIP package but the clone one has an SMD package microcontroller. Arduino Uno r3 kit is more powerful as compared to the dip version.
SKU: SH05 -
Arduino Boards
W5100 Ethernet Shield Network Expansion Board With Micro SD Card Slot For Arduino
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100ethernet chip (datasheet). The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.
SKU: SH87
There are no reviews yet.