SMART HALL ROAD
FEATURED CATEGORIES
Visit our shop to see amazing PRODUCTS.
MOST POPULAR IN NEON
ARDUINO BOARDS
BEST SELLING PRODUCTS
WoodMart is a powerful eCommerce theme for WordPress.
Arduino Uno R3 Dip With Arduino Logo In Pakistan
Original price was: ₨1900.₨1650Current price is: ₨1650.
ARRIVALS
NEW ARRIVALS
we have everything that you need
Arduino 28BYJ48 5V Stepper Motor With ULN2003 Driver In Pakistan
W5100 Ethernet Shield Network Expansion Board With Micro SD Card Slot For Arduino
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100ethernet chip (datasheet). The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.
8MP Raspberry Pi Camera Module v2 in Pakistan
The Raspberry Pi Camera Module v2 is a high quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It’s capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.It attaches to Pi by way of one of the small sockets on the board upper surface and uses the dedicated CSi interface, designed especially for interfacing with cameras. The board itself is tiny, at around 25mm x 23mm x 9mm. It also weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. The high-quality Sony IMX219 image sensor itself has a native resolution of 8 megapixels and has a fixed focus lens onboard.In terms of still images, the camera is capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video.
Raspberry Pi NoIR 8MP Night Vision Camera Module V2 in Pakistan
The Raspberry Pi NoIR Camera Module v2 is a high quality 8 megapixel Sony IMX219 image sensor custom designed add-on board for Raspberry Pi, featuring a fixed focus lens. It's capable of 3280 x 2464 pixel static images and also supports 1080p30, 720p60 and 640x480p60/90 video. It attaches to Pi by way of one of the small sockets on the board upper surface and uses the dedicated CSi interface, designed especially for interfacing with cameras. The board itself is tiny, at around 25mm x 23mm x 9mm. It also weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. It connects to Raspberry Pi by way of a short ribbon cable. The high-quality Sony sensor itself has a native resolution of 8 megapixels and has a fixed focus lens onboard. In terms of still images, the camera is capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video.
L293 L293D Motor Driver Module Arduino Motor Driver Module
This L293D Motor Driver/Servo Shield for Arduino is probably one of the most versatile on the market and features 2 servo and 4 motor connectors for DC or stepper motors. That makes it a great shield for any robotic project. This Arduino compatible motor Driver shield is a full-featured product that it can be used to drive 4 DC motor or two 4-wire steppers and two 5v servos. It drives the DC motor and stepper with the L293D, and it drives the servo with Arduino pin9 and pin10.
P10 BLUE SMD LED Display Panel Semi Outdoor LED Module
This modular BLUE LED display panel can be used to make any kind of large semi-outdoor LED display panels by arranging modules in a horizontal and vertical manner. One panel has a width of 12 inches and a height of 6 inches. The P10 RED LED Display has a resolution of 32×16 pixels thus there are a total of 512 LEDs. P10 Advertising Panel has a good quality plastic cabinet that makes it suitable for semi-outdoor use. The p10 sign Board Wall Display module has a whole control circuit built-in and has a simple interface requiring only seven-line connections with a controller board.
GY-61 Triple Axis Accelerometer module ADXL335 in Pakistan
The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
XL4015 Step-Down Buck Charging Board DC 0.8-30V to 5-32V In Pakistan
SPDT Rocker Switch Button 3 Pin 2 Position 6A 250V in Pakistan
Adjustable Double Layer Component Organizer Tool Container Storage Box F240 in Pakistan
Small tools storage box is made of PP material and 8 grid component storage container is durable for use. This storage organizer chest, the size of each grid can be adjusted by removing the PP sheet at the bottom layer. Each adjustable compartment is straight and smooth to remove. There are slots under the box cover so that the grid can be tightly closed. This component plastic box is suitable for storage of electronic components, jeweler, cosmetics, stationery and small tool kits. Can be used for storing IC chips, nails, screws, nuts, bolts, washers, earrings, beads, thumbtack, clips, fishhooks and other small parts.
Raspberry Pi 4 Case With Fan Fitting Raspberry Pi 4 Casing Cover in Pakistan
Raspberry Pi 4 Case with fan fitting option is designed to protect your Raspberry Pi 4 board from external environment. Pi 4 Case fits the Raspberry Pi 4 Model B 1GB, 2GB, and 4GB. Raspberry Pi 4 cover is red and white. This best Pi 4 casing cover, the no-fuss case simply snaps together around your board. Once the case is closed, you will still have access to all the ports on the board through cut-outs. It is mainly designed to protect your Pi board from knocks and bumps, but this case for raspberry pi 4 has also been designed to be lightweight and sleek. So you can carry you in your pocket or backpack without worry.
QC2.0 Dual USB Fast Charger Buck Module In Pakistan
This USB buck fast-charging module integrates the common 5V charging recognition function, which is compatible with 99% of the mobile phones on the market. Compared with products without a charging recognition function, this module can save a lot of charging time by triggering the peak current via fast charging protocol. It features 6~32V input and 3~12V output (default 5V). The voltage can be changed through a fast-charging decoy. Multiple fast-charging protocols are supported.
TE-801 4x 12x Zoom Helping Hand Soldering Stand with Magnifying Glass and LED Lights Helping Hand in Pakistan
This is a very practical loupe magnifying lens in life, which is designed especially for extra sharpness and clarity. Magnifier Soldering Iron Stand is a brand new and high quality absolutely a useful aid for soldering work or model makers, with adjustable crocodile holding clamps. What is more, the bottom battery compartment is furnished with a steel plate which can enhance stability. With two LED lighting, this model can work very well in the dark environment. It can enlarge fine print in jewelry, maps, newspapers, directories, legal documents, coins, stamps, and antiques, etc. when you don’t use it currently, the lens can be retracted in the shell.
