SMART HALL ROAD
FEATURED CATEGORIES
Visit our shop to see amazing PRODUCTS.
MOST POPULAR IN NEON
ARDUINO BOARDS
BEST SELLING PRODUCTS
WoodMart is a powerful eCommerce theme for WordPress.
Arduino Uno R3 Dip With Arduino Logo In Pakistan
Original price was: ₨1900.₨1650Current price is: ₨1650.
ARRIVALS
NEW ARRIVALS
we have everything that you need
4s BMS 4S 40a BMS Li-ion Battery Protection Board Balanced Version in Pakistan
The 4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module comes with recovery function – AUTO Recovery and Integrated 10 low load resistance MOS tube. It provides a continuous discharge of 40A, 100mA balanced current, for electric drill/sprayer/LED lights/low power inverter. (If the cooling environment is not good, please reduce the load current use).The Scope of Nominal voltage of 3.6V, 3.7V lithium battery (including 18650, 26650, a polymer lithium battery) where Charging voltage can be range between 16.8V to 18.1V The board operates smoothly with Continuous charge current of (upper limit): 20A. The balanced version is suitable for starting current below 80A, power 135W below the drill (with balance).
25 Section Cabinet Plastic Drawer Organizer Box Components Jewelry Box
(Advance Payment Only)
(Delivery Via Cargo Service)
This 25 Section Cabinet Plastic Drawer Box is Ideal for organizing fasteners, small parts, tools, and hobby supplies and these Multipurpose Drawer stops prevent accidental spills from the backside. These Drawers are also used as Jewelry Storage, Kitchen Spices, And medicine storage boxes see-through drawers for maximum versatility and easy identification of contents. Medicine Storage Transparent Box is very Lightweight and extra durable.
XH-M604 Battery Charger Control Module DC 6-60V Storage Lithium Battery Charging Control Switch Protection Board In Pakistan
KY-022 Arduino Infrared Sensor Infrared Receiver Module 38khz Receiver In Pakistan
W5100 Ethernet Shield Network Expansion Board With Micro SD Card Slot For Arduino
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100ethernet chip (datasheet). The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.
Huidu HD WF2 RGB 7 Colors Full Color HUB75 Control Card In Pakistan
30Cm Hole to Hole DuPont Line 40pcs Jumper Wire Cable In Pakistan
1Meter 5mm Heat Shrink Sleeve Heat Shrink Tube In Pakistan
1Meter 5mm Heat Shrink Sleeve Industrial Grade WOER (HST) is excellent for insulation. They have exceptional insulation characteristics, excellent stress control properties; long-term weather and regular wear and tear resistance, ease of installation, and reliable performance even in harshest of the situations. These High performance 2:1 heat shrink material tubes, bundles, and protects cables wire, and hoses are used for a wide range of DIY applications. It is used extensively for cable and wire harnessing, strain relief, insulation, color coding, identification, and protection.
USB Full Color LED Display Controller HC-1
USB Full Color LED Display Controller HC-1 is a standalone LED panel controller which is programmed using the NewWing A-Syn software for Windows. The display controller supports a wide range of LED panels from P10 (or larger) down to P4 (and smaller), with scan rates from 1/16 to 1/4. This LED display control card module for the panel, compatibility refer to LED Panel compatibility.
KEWEISI USB Current Voltage Meter Battery Tester In Pakistan
KEWEISI USB Volt Amp Meter Mobile Charging Current Voltage Detector Tester KEWEISI Double USB for Output 3-9V 0.1-3A USB Tester is USB Current Voltage Meter Battery Tester measures and displays current and voltage simultaneously. USB Current Voltage Meter Battery Tester is also known as USB Doctor. This can easily measure the operating current of the output voltage of the USB port and equipment 2.
Arduino Pro Mini 3.3V 8Mhz ATMEGA328P Board in Pakistan
Arduino Pro Mini ATMEGA328P is a 3.3V Arduino (Official Version) running the 8MHz bootloader. Arduino Pro Mini ATMEGA328P comes with connectors so that you can solder connectors or wires with any orientation you need. We recommend the first-time Arduino users start with the Uno R3. It’s a great board that will get you up and be running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off-board.
TYPE C TP4056 Lithium Battery Charging Board 1A In Pakistan
The first time you access the battery, it may no voltage between the output OUT + and OUT-, then access 5V voltage charge your energy can activate the protection circuit, and the battery from the B + B-, then draw a line on the short open also need recharged to activate the protection circuit. Note that the charger must be able to output 1A or more to do when using a mobile phone charger input, or may not charge.
TPM10 Digital Thermometer Temperature Sensor Tester Meter FY-10 with metal sensor in Pakistan
Mini LCD digital thermometer FY10 is with a simple and elegant design. This mini electronic thermometer's LCD that panels inline connections, moisture-resistant, strong anti-interference. This temperature thermometer applies to refrigerated cabinets, display counters and other needs of temperature measurement and display of various equipment.
Arduino Leonardo Atmega32u Based Development Board In Pakistan
he Arduino Leonardo is a micro-controller board base on the ATmega32u4 (datasheet). It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs); a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything need to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.