SMART HALL ROAD

FEATURED CATEGORIES

Visit our shop to see amazing PRODUCTS.

MOST POPULAR IN NEON

ARDUINO BOARDS

BEST SELLING PRODUCTS

WoodMart is a powerful eCommerce theme for WordPress.

ARRIVALS

NEW ARRIVALS

we have everything that you need

W5100 Ethernet Shield Network Expansion Board With Micro SD Card Slot For Arduino

2800
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100ethernet chip (datasheet). The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.

DC Gear Motor 6v TT Yellow Gear Motor Double Shaft

150
This gear motor is perfect for your next robotics project. This gear motor is ideal for robotic car or line-tracing robot. With plastic construction and colored in bright yellow, the DC gear motor measures approx. 2.5 inch long, 0.85 inch wide and 0.7 inch thick. The wheel can be mounted on either side and the Gearmotor works well between 4V to 7V (recommended 6 Volts). At a ratio of 1:48 you can get some really good torque at 5 Volts.

8 Cells Dual USB Power Bank Case With LCD Display in Pakistan

1150
ual USB Power Bank Case is a brand new and high-quality Case. This USB LCD power bank battery shell has an LED indicator, showing charging status and on/off status. This 18650 power bank battery box has an electricity-saving function. 8 x 18650 power bank case is the best environmentally friendly and economic efficiency. This wireless power bank case has two USB output for charge mobile phone, MP3, MP4, tablet2 LED light reminds stock energy.

18650 Lithium Cell Battery Holder Bracket In Pakistan

Original price was: ₨12.Current price is: ₨9.
This Cell Battery Holder Bracket is very useful and very flexible to use. This battery pack is of high quality with a stylish design. This cell battery pack can be reserved 720-degree temperature and not break. This best battery pack ABS + PC material is eco-friendly and solid, endurable. Cascadable to make larger battery packs. Plastic notches fit in the next bracket and provide a rigid battery holding. It can be used in Battery holders for Robots, Battery holders for Emergency Lights, Battery holders for USB Power Banks, Battery holders for Personal Tracker or Vehicle Trackers, and Battery holders for custom-designed hand-held electronic gadgets.

PAM8610 2-Channel Digital Audio Stereo Amplifier

450

PAM8610 with volume 12V dual-channel digital amplifier board stereo audio amplifier board 15W * 2

Arduino Pro Mini 5V 16Mhz ATMEGA328 Board In Pakistan

1000
The Arduino Pro Mini 5v 16mhz ATMEGA328 is intended for advanced users who require flexibility, low cost, and small size. It comes with a minimum of components (no onboard USB or pin headers) to keep the cost down. Be sure to provide the correct power and use components whose operating voltage matches that of the board.

TDA3118 Digital 2 Channel Mono Audio Amplifier Board Module In Pakistan

600
The Audio Amplifier Board Module TDA3118 is a limited version of the TDA3116D2. The limitation seems obtained by different packages for the two chips. This amplifier module is supplied in a plastic package (HTSSOP32) with a cooling pad turned downward on the PCB while the TPA3116D2 package has a cooling pad on the top for a heat sink.

Vero Board Breadboard Jumper Cable Dupont Wire 7cm Red Black Jumper Wire In Pakistan

400
This cable is used as a jumper on the Vero board or breadboard. You can solder both ends or you can cut down and make it lower length. Breadboard Jumper Cable Dupont Wire Electronic Wires Red & Black Color is a very commonly used product.

TowerPro SG90 SG 90 180 Degree Servo Motor In Pakistan

280
The TowerPro SG90 mini servo motor is lightweight, high-quality, and lightning-fast. The servo is designed to work with almost all the radio control systems. It is with excellent performance that brings you to another horizon of flight. The SG90 mini servo with accessories is perfect for R/C helicopter, plane, car, boat, and truck use.

ADXL345 Tripple Axis Accelerometer Module in Pakistan

450
DXL345 Tripple Axis Accelerometer Board is a small, thin, low-power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16g. Digital output data is formatted as 16-bit twos complement and is accessible through either a SPI (3- or 4-wire) or I2C digital interface.

L293 L293D Motor Driver Module Arduino Motor Driver Module

400
This L293D Motor Driver/Servo Shield for Arduino is probably one of the most versatile on the market and features 2 servo and 4 motor connectors for DC or stepper motors. That makes it a great shield for any robotic project. This Arduino compatible motor Driver shield is a full-featured product that it can be used to drive 4 DC motor or two 4-wire steppers and two 5v servos. It drives the DC motor and stepper with the L293D, and it drives the servo with Arduino pin9 and pin10.

1Meter 30mm Heat Shrink Sleeve Heat Shrink Tube In Pakistan

120
1Meter 30mm Heat Shrink Sleeve Industrial Grade WOER (HST) is excellent for insulation. They have exceptional insulation characteristics, excellent stress control properties; long-term weather and regular wear and tear resistance, ease of installation, and reliable performance even in harshest of the situations. These High performance 2:1 heat shrink material tubes, bundles, and protects cables wire, and hoses are used for a wide range of DIY applications. It is used extensively for cable and wire harnessing, strain relief, insulation, color coding, identification, and protection

5V Raspberry Pi 4 fan in Pakistan

300
5V Raspberry Pi Fan keeps Raspberry Pi computers truly cool with a dedicated 5V, 3.3mm square fan. This Raspberry Pi Fan is ideal when you’re running it near 100% load all the time. Mounts to our Raspberry Pi S.A.F.E. (for B+ and V2) top plate (4-40 x 5/8″ bolts & nuts not included). We’ve successfully used the onboard expansion port header to power our fan installations. Lift the retainer tab on the ground (black lead) and pull it out, and plug the connector (with the remaining red wire) to the corner-most pin. The ground pin can be then mounted to the pin 2 spaces down from it to give you a solid 5V for the fan.