1s 3a 3.7v Li-Ion Bms Pcm Protection Board in Pakistan
This is 1S 18650 Li-ion Lithium Battery BMS
₨60
This is 1S 18650 Li-ion Lithium Battery BMS
Specification of 1s 3a 3.7v Li-Ion Bms Pcm Protection Board:
- High accuracy voltage detection circuit;
- Using high voltage device charging terminal;
- The built-in three-stage overcurrent detection circuit (overcurrent 1, overcurrent 2, load short circuit);
- The battery charge and discharge can control the MOS transistor;
Package Include:
- 1X 1s 3a 3.7v Li-Ion Bms Pcm Protection Board Without Wire For 18650 Lithium Lion Battery in Pakistan
Based on 0 reviews
Be the first to review “1s 3a 3.7v Li-Ion Bms Pcm Protection Board in Pakistan”
Related products
-
BMS Circuit
4s BMS 4S 40a BMS Li-ion Battery Protection Board Balanced Version in Pakistan
The 4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module comes with recovery function – AUTO Recovery and Integrated 10 low load resistance MOS tube. It provides a continuous discharge of 40A, 100mA balanced current, for electric drill/sprayer/LED lights/low power inverter. (If the cooling environment is not good, please reduce the load current use).The Scope of Nominal voltage of 3.6V, 3.7V lithium battery (including 18650, 26650, a polymer lithium battery) where Charging voltage can be range between 16.8V to 18.1V The board operates smoothly with Continuous charge current of (upper limit): 20A. The balanced version is suitable for starting current below 80A, power 135W below the drill (with balance).
SKU: SH118 -
BMS Circuit
2S 7.4V 8A BMS PCB Battery Protection Board For 18650 Li-ion Lithium-Ion Battery In Pakistan
BMS Circuit2S 7.4V 8A BMS PCB Battery Protection Board For 18650 Li-ion Lithium-Ion Battery In Pakistan
A battery management system (BMS) is an electronic regulator that monitors and controls the charging and discharging of rechargeable batteries. Battery BMS protection boards are the brains behind battery packs. 2S 8A BMS manages the output, charging, and discharging and also provides critical safeguards to protect the batteries from damage. 18650 protection circuit Board is a high-accuracy voltage detection circuit. The 8A protection board can not be used for lithium-ion batteries.
SKU: SH112 -
BMS Circuit
Liitokala Lii-500 Lithium battery Charger in Pakistan
- Input: DC 12V / 2A(min.)
- Charge output: Li-Ion 4.2V 300mA/500mA/700mA/1000mA * 4
- Ni-MH/Cd 1.48V 300mA/500mA/700mA/1000mA * 4
- Charging cut-off voltage: lithium-ion battery 4.2 ± 0.05V
- Discharge output: 500mA cutoff Li-Ion 2.8V/ NiMH 0.9V
- USB output: 5V 1000mA (only with Li-Ion 3.7V battery inserted)
- For battery sizes: diameter 8mm-26mm; height 34mm-71mm
- NiMH/Cd AAA/Micro, AA/Mignon, C/ Bady, Sub- C, A
- Li-Ion 26650, 22650, 18650,18490, 18500,
- 17500, 17355, 16340(RCR123), 14500, 10440
- Dimensions: L*W*H / 162*96*36mm
SKU: SH-258 -
BMS Circuit
3S 25A BMS Circuit Li-ion Battery Charging Protection 3SJH25A-C In Pakistan
This Battery BMS 3S 12V 25A Charger 18650 BMS Lithium battery protection board.It is use to protect the battery to prevent the battery from being over-discharged or over-charged during use, resulting in battery damage.
SKU: SH115
There are no reviews yet.