3S BMS 20A Li-ion Lithium Battery 18650 PCB Charger Protection Board in Pakistan
₨230
3S BMS 20A Li-ion Lithium Battery 18650 PCB Charger Protection Board in Pakistan
Description
3S BMS 20A Li-ion Lithium Battery 18650 PCB Charger Protection Board in Pakistan
Specifications Of 3S 20A Li-ion Lithium Battery 18650 Charger Protection Board:
- Model:Â HX – 3 s – 01 charging pressure range: 4.25 + / – 0.05 v to 4.35 v
- Size:Â 50 * 16 * 1.0 mm discharge voltage range: 2.3 + / – 0.05 v to 3.0 v
- Maximum working current: 5-6 – a working temperature: – 40 – + 50 ℃
- Maximum instantaneous current: 8 a storage conditions: – 40 – + 80 ℃
- Static electricity:Â less than 30 ua useful life: more than 50000 hours
- Resistance: less than 45 m Ω short circuit protection: to protect and restore must charge
- Charging voltage:Â 12.6 V – 13 V
- The protection plate size of 50 * 16 * 1.0 mm; Components for the S – 8254 aa protection chip and AO4407 * 4;
Package Include:
- 1X 3S BMS 20A Li-ion Lithium Battery 18650 PCB Charger Protection Board in Pakistan
Additional information
| Weight | 0.1 kg |
|---|
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
3S 40A BMS 11.1V 12.6V 18650 Lithium Battery Protection Board with 100mA Balancing Feature in Pakistan
The 3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module comes with recovery function-AUTO Recovery and Integrated 10 low load resistance MOS tube. It provides a continuous discharge of 40A, 100mA balanced current, for electric drill/sprayer/LED lights/low power inverter.  (if the cooling environment is not good, please reduce the load current use).The Scope of Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, a polymer lithium battery) where Charging voltage can be range between 16.8V to 18.1V The board operates smoothly with Continuous charge current of (upper limit): 20A. The balanced version is suitable for starting current below 80A, power 135W below the drill (with balance).
Micro USB TP4056 Lithium Battery 18650 Charger Module 1A 3.7V
The TP4056 1A Li-ion Lithium Battery Charging Module – Micro USB is a 3.7V lithium battery charger module that has an onboard Micro USB interface. TP4056 With Micro-USB onboard connector, you can directly connect to the computer USB port for battery charging. If USB is not available you can use an external source voltage at IN+/IN- pads, great for DIY projects. It is small size and lightweight.
TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection BMS
This 3.7V Battery Charger TP4056 module is made for charging rechargeable lithium batteries using the constant-current/constant-voltage (CC/CV) charging method. In addition to safely charging a lithium battery, TP4056 BMS Board also provides the necessary protection required by lithium batteries. The TP4056 is suitable for USB power and adapter power supplies. Due to the internal PMOSFET architecture and anti-reverse charging path, no external isolation diodes are required.
TYPE C TP4056 Lithium Battery Charging Board 1A In Pakistan
The first time you access the battery, it may no voltage between the output OUT + and OUT-, then access 5V voltage charge your energy can activate the protection circuit, and the battery from the B + B-, then draw a line on the short open also need recharged to activate the protection circuit. Note that the charger must be able to output 1A or more to do when using a mobile phone charger input, or may not charge.
Reviews
There are no reviews yet.