WEMOS D1 Mini Pro With External Antenna In Pakistan
Wemos D1 Pro With esp8266 chip It has comparison with nodemcu, arduino wifi and other wifi modules.WEMOS D1 Mini Pro Have External Connector for an antenna with ESP8266 CP2104 WIFI Development Board With Compatible pins for WEMOS D1 Mini.
₨1350
Wemos D1 Pro With esp8266 chip It has comparison with nodemcu, arduino wifi and other wifi modules.WEMOS D1 Mini Pro Have External Connector for an antenna with ESP8266 CP2104 WIFI Development Board With Compatible pins for WEMOS D1 Mini.
Specification of WEMOS D1 Mini Pro With External Antenna:
- Microcontroller ESP-8266EX
- Operating Voltage 3.3V
- Digital I/O Pins 11
- Analog Input Pins 1(Max input: 3.2V)
- Clock Speed 80MHz/160MHz
- Flash 4M bytes
- Length 34.2mm
- Width 25.6mm
- Weight 2.5g
- NOTE: All of the IO pins have interrupt/PWM/I2C/one-wire support except D0, All of the IO pins run at 3.3V.
Package Include:
- 1 x WEMOS D1 Mini Pro With External Antenna In Pakistan
Based on 0 reviews
Be the first to review “WEMOS D1 Mini Pro With External Antenna In Pakistan”
Related products
-
IOT Boards, Instruments And Tools
Arduino Camera OV7670 640×480 VGA CMOS Camera Image Sensor Module In Pakistan
IOT Boards, Instruments And ToolsArduino Camera OV7670 640×480 VGA CMOS Camera Image Sensor Module In Pakistan
Arduino Camera OV7670 640×480 VGA CMOS Camera Image Sensor Module is a low-cost image sensor, DSP that can operate at a maximum of 30 fps and 640 x 480 (“VGA”) resolutions, equivalent to 0.3 Megapixels. The captured image can be pre-processed by the DSP before sending it out. This pre-processing can be configured via the Serial Camera Control Bus (SCCB). Omni Vision OV7670 CMOS VGA (640 x 480) CAMERA-CHIP Sensor with Omni Pixel technology 3.3V DC Input Voltage. working Temp. 0-50 Degree Celsius All Glass Lenses, Lens(including seat) is Magnesium Alloy material.
SKU: SH-282 -
IOT Boards
38 Pin Nodemcu ESP32S Microcontroller WiFi & Bluetooth ESP WROOM 32 Development Board Module In Pakistan
IOT Boards38 Pin Nodemcu ESP32S Microcontroller WiFi & Bluetooth ESP WROOM 32 Development Board Module In Pakistan
This is an IoT board that can be used as a client mode where collected sensor data can be sent to the server using WiFi protocol. Or, used as the main server to control Led, relay or any output that is connected to this board. This board is fully supported by the Arduino IDE program.
SKU: SH21 -
IOT Boards
WeMos D1 Mini WIFI Development Board ESP8266 In Pakistan
This IOT Wemos D1 Mini WIFI Internet Of Things Development Board based on ESP8266 esp12e, Wemos d1 Mini is a WIFI board based on ESP-8266EX. 11 digital input/output pins, all pins have interrupt/PWM/I2C/one-wire supported(except D0) 1 analog input(3.3V max input) and a Micro USB connection. The Wemos D1 Mini is a great board to develop WiFi-based IoT Projects. It uses the popular ESP8266 Module for its IoT operations.
SKU: SH27 -
IOT Boards
ESP-12 ESP8266-12e Wifi Module Wireless IoT Board Module In Pakistan
The Latest ESP-12E ESP8266 Wifi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks. It is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with full TCP/IP stack and MCU (Micro Controller Unit) capability.
SKU: SH26 -
IOT Boards
ESP32-CAM WiFi + Bluetooth Camera Module Development Board ESP32 With Camera Module OV2640 For Arduino In Pakistan
IOT BoardsESP32-CAM WiFi + Bluetooth Camera Module Development Board ESP32 With Camera Module OV2640 For Arduino In Pakistan
ESP32-CAM is a WIFI+ Bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.ESP integrates WiFi, traditional Bluetooth, and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc. Fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other hosts MCUs to add networking capabilities to existing devices.ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications. It is an ideal solution for IoT applications.
SKU: SH24
There are no reviews yet.