3S 25A BMS Circuit Li-ion Battery Charging Protection 3SJH25A-C In Pakistan
₨325
This Battery BMS 3S 12V 25A Charger 18650 BMS Lithium battery protection board.It is use to protect the battery to prevent the battery from being over-discharged or over-charged during use, resulting in battery damage.
Description
This Battery BMS 3S 12V 25A Charger 18650 BMS Lithium battery protection board.It is use to protect the battery to prevent the battery from being over-discharged or over-charged during use, resulting in battery damage.
Specification And Feature of 3S 25A BMS Battery Charging Protection For 18650 Cell:
- Overcharge voltage range:Â 4.25-4.35v + 0.05v.
- Overdischarge voltage range:Â 2.3-2.7v + 0.05v.
- Operating current: 0 – 25A.
- Operating temperature: -40 – +50℃.
- Instantaneous current: 35 – 40A.
- Storage condition: -40 – +80℃.
- Quiescent current:Â less than 30uA.
- Balance current: about 40 – 50mA.
- Effective life:Â more than 30000 hours.
- Internal resistance:Â less than 100m ohm.
- Short-circuit protection:Â protection, delayed self recovery.
- Length (mm):56.5
- Width (mm):45
- Height (mm):4
Package Include:
- 1X 3S 25A BMS Circuit Li-ion Battery Charging Protection 3SJH25A-C In Pakistan
Additional information
| Weight | 0.1 kg |
|---|
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
3S 40A BMS 11.1V 12.6V 18650 Lithium Battery Protection Board with 100mA Balancing Feature in Pakistan
The 3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module comes with recovery function-AUTO Recovery and Integrated 10 low load resistance MOS tube. It provides a continuous discharge of 40A, 100mA balanced current, for electric drill/sprayer/LED lights/low power inverter.  (if the cooling environment is not good, please reduce the load current use).The Scope of Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, a polymer lithium battery) where Charging voltage can be range between 16.8V to 18.1V The board operates smoothly with Continuous charge current of (upper limit): 20A. The balanced version is suitable for starting current below 80A, power 135W below the drill (with balance).
Battery Protection Board 4S 20A 14.8V BMS For 18650 Lithium Ion Cells HX-4S-A20 in Pakistan
A battery management system (BMS) is an electronic regulator that monitors and controls the charging and discharging of rechargeable batteries. Battery BMS protection boards are the brains behind battery packs. 20A 4S BMS manages the output, charging, and discharging and also provides critical safeguards to protect the batteries from damage. 18650 protection circuit Board is a high-accuracy voltage detection circuit. The 20A protection board can be used for lithium-ion Phosphate batteries, Low power inverters, massager battery packs, electronics, LED light backup power supplies, solar street lights battery packs and many other products
HX-4S-F100A 100A 4S BMS 18650 Battery Protection Board 4S 100A BMS Module in Pakistan
This HX-4S-F100A based 100A BMS board also called ( battery management system ). HX-4S-F100A is a protection board for li-ion 18650 cells. There are 10 MOSFET'S, strong heat-dissipating aluminum sheet installed on it, and the continuous current limit is 100A. It is suitable for 4 series lithium battery pack. This Battery Protection board have overcharge protection, over-discharge protection, over current protection, short circuit protection, temperature protection.
Liitokala Lii-500 Lithium battery Charger in Pakistan
- Input: DC 12V / 2A(min.)
- Charge output: Li-Ion 4.2V 300mA/500mA/700mA/1000mA * 4
- Ni-MH/Cd 1.48V 300mA/500mA/700mA/1000mA * 4
- Charging cut-off voltage: lithium-ion battery 4.2 ± 0.05V
- Discharge output: 500mA cutoff Li-Ion 2.8V/ NiMH 0.9V
- USB output: 5V 1000mA (only with Li-Ion 3.7V battery inserted)
- For battery sizes: diameter 8mm-26mm; height 34mm-71mm
- NiMH/Cd AAA/Micro, AA/Mignon, C/ Bady, Sub- C, A
- Li-Ion 26650, 22650, 18650,18490, 18500,
- 17500, 17355, 16340(RCR123), 14500, 10440
- Dimensions: L*W*H / 162*96*36mm
Micro USB TP4056 Lithium Battery 18650 Charger Module 1A 3.7V
The TP4056 1A Li-ion Lithium Battery Charging Module – Micro USB is a 3.7V lithium battery charger module that has an onboard Micro USB interface. TP4056 With Micro-USB onboard connector, you can directly connect to the computer USB port for battery charging. If USB is not available you can use an external source voltage at IN+/IN- pads, great for DIY projects. It is small size and lightweight.
TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection BMS
This 3.7V Battery Charger TP4056 module is made for charging rechargeable lithium batteries using the constant-current/constant-voltage (CC/CV) charging method. In addition to safely charging a lithium battery, TP4056 BMS Board also provides the necessary protection required by lithium batteries. The TP4056 is suitable for USB power and adapter power supplies. Due to the internal PMOSFET architecture and anti-reverse charging path, no external isolation diodes are required.
ZB2L3 HW-586 HW586 Battery Capacity Tester External Load Discharge Type Module In Pakistan
Using the resistance of the discharge process, resistive load will seriously heat, please pay attention to safety.Please install the 50W aluminum resistance (has been soldered half part of high temperature line) to a metal plate to use.This circuit voltage in order to improve the measurement accuracy, specially designed DC bias, when the terminal connects nothing will display a small voltage, but does not affect the actual measurement, if you are shorting the input terminal (absolute 0V) will display 0. If you want to know the principle, you can check the superposition theorem of electrical engineering.
Reviews
There are no reviews yet.