Micro USB TP4056 Lithium Battery 18650 Charger Module 1A 3.7V
The TP4056 1A Li-ion Lithium Battery Charging Module – Micro USB is a 3.7V lithium battery charger module that has an onboard Micro USB interface. TP4056 With Micro-USB onboard connector, you can directly connect to the computer USB port for battery charging. If USB is not available you can use an external source voltage at IN+/IN- pads, great for DIY projects. It is small size and lightweight.
₨60
The TP4056 1A Li-ion Lithium Battery Charging Module – Micro USB is a 3.7V lithium battery charger module that has an onboard Micro USB interface. TP4056 With Micro-USB onboard connector, you can directly connect to the computer USB port for battery charging. If USB is not available you can use an external source voltage at IN+/IN- pads, great for DIY projects. It is small size and lightweight.
Specification of Micro USB TP4056 Lithium Battery 18650 Charger Module 1A 3.7V:
-
Charging accuracy (%) 1.5 Charging method Linear Full Charge Voltage (V) 4.2 Height (mm) 4 Input Interface Micro USB Input Voltage (V) 4.5-5.5 Length (mm) 24 Operating Temperature (°C) -10 to 85 Rated Power 4.2 W Weight (gm) 1.5 Width (mm) 18 Shipment Weight 0.015 kg Shipment Dimensions 2.6 x 2 x 0.6 cm
Package Include:
- 1 x Micro USB TP4056 Lithium Battery 18650 Charger Module 1A 3.7V
Based on 0 reviews
Be the first to review “Micro USB TP4056 Lithium Battery 18650 Charger Module 1A 3.7V”
Related products
-
BMS Circuit
3S 25A BMS Circuit Li-ion Battery Charging Protection 3SJH25A-C In Pakistan
This Battery BMS 3S 12V 25A Charger 18650 BMS Lithium battery protection board.It is use to protect the battery to prevent the battery from being over-discharged or over-charged during use, resulting in battery damage.
SKU: SH115 -
BMS Circuit
HX-3S-1 Lithium Battery 3S 12V 10A Charge Protection Board BMS PCM for 18650 Li-ion Cells Charging in Pakistan
BMS CircuitHX-3S-1 Lithium Battery 3S 12V 10A Charge Protection Board BMS PCM for 18650 Li-ion Cells Charging in Pakistan
Battery Charger Protection Board is a 3S 10A board. Lithium Batteries BMS with 10.8V rated voltage for polymer battery, 11.1V 18650, or 3.7V lithium battery rated voltage and 12.6V lithium battery can be charged. And discharge 10A (referring to the maximum discharge current limit) Lithium battery protection board it also comes with over-charge, over-discharge, over-current, short circuit protection. A battery pack built together with a battery management system with an external communication data bus is a smart battery pack. A smart battery pack must be charged by a smart battery charger.
SKU: SH113 -
BMS Circuit
HW-370 TP5100 2A Li Ion Battery Charger Module In Pakistan
TP5100,TP5100 module ,TP5100 charger or TP5100 charger module is 2A Lithium-Ion 18650 Battery Charger Module is a double switch buck 8.4V, single cell 4. 2V lithium battery charge management chip. TP5100,TP5100 module ,TP5100 charger or TP5100 charger module is ultra-compact QFN16 package and simple external circuit, making TP5100 ideal for portable equipment so large current charging management applications. Meanwhile.
SKU: SH69 -
BMS Circuit
ZB2L3 HW-586 HW586 Battery Capacity Tester External Load Discharge Type Module In Pakistan
BMS CircuitZB2L3 HW-586 HW586 Battery Capacity Tester External Load Discharge Type Module In Pakistan
Using the resistance of the discharge process, resistive load will seriously heat, please pay attention to safety.Please install the 50W aluminum resistance (has been soldered half part of high temperature line) to a metal plate to use.This circuit voltage in order to improve the measurement accuracy, specially designed DC bias, when the terminal connects nothing will display a small voltage, but does not affect the actual measurement, if you are shorting the input terminal (absolute 0V) will display 0. If you want to know the principle, you can check the superposition theorem of electrical engineering.
SKU: SH71
There are no reviews yet.