3x 18650 Battery Cell Case Holder in Pakistan

80
3x 18650 Battery Cell Case Holder puts the batteries in series so you have 3x the voltage of a 18650 battery. 3x 18650 Battery Cell Case Holder battery holder is suitable for standard 18650 cells, as well as 18650 cells with protection circuit. This holder provides output leads approximately 6" long for soldering or connecting to your circuit. There are mounting holes in the bottom to secure to a panel, bulkhead or mounting plat.

HC-SR501 PIR Motion Sensor Module in Pakistan

180
The PIR Motion Sensor Detector Module HC-SR501 allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor’s range. It is often referred to using “PIR”, “Pyroelectric”, “Passive Infrared” and “IR Motion” sensor. The module has an onboard pyroelectric sensor, conditioning circuitry, and a dome-shaped Fresnel lens. It has a delay time adjustment Potentiometer and sensitivity adjustment Potentiometer. Repeat Trigger Selection solderable Jumper is also available.

WEMOS D1 Mini Pro With External Antenna In Pakistan

1350
Wemos D1 Pro With esp8266 chip It has comparison with nodemcu, arduino wifi and other wifi modules.WEMOS D1 Mini Pro Have External Connector for an antenna with ESP8266 CP2104 WIFI Development Board With Compatible pins for WEMOS D1 Mini.

WOXSN Smart Socket Automatic Digital Volt Protector Muhafiz Switch In Pakistan

900
Woxsn Smart Socket is an innovative product that enables you to monitor and protect any electrical load connected to your Smart Socket until 5 ampere. Woxsn Smart Socket provides the following parameters/features to the user.

20Cm Pin to Hole DuPont Line 40pcs Jumper Wire Cable In Pakistan

170
This is a 20CM Dupont Wire Color Jumper Cable, 2.54mm 1P-1P Male to Female 40PCS. A very Flexible and easily detachable cable to the no. of wires according to your requirement. It has 1Pin male to the 1pin female header with both ends. Also, it is compatible with 2.54 mm mil spacing pin headers.

1 Meter DC 12V Green Neon Flexible Strip Light Rope Light Waterproof For Indoor Outdoor Decoration In Pakistan

230
1 Meter DC 12V Green Flexible IP65 Waterproof Neon LED Strip Light 12V DC 9W/m has a translucent High-quality Silicone cover that offers uniform light and performs better than the standard Strip lights with visible individual LED Chips. Because it’s so flexible, its installation is simple and doesn’t require any specific tools, allowing it to adapt to all sorts of corners, logos, signs, etc. Cuttable every 2.5cm. Silicone cover has a high-quality finish that offers a longer life than standard PVC covers. You can rest assured that the Silicone cover will last longer and not discolor like PVC covers.LED Neon Flex 12V DC comes with a Standard Connector & End Cap. This LED light with its neon effect and flexible composition has a visually attractive and innovative design that’s perfect for any Home, Office, or setting.

Micro USB TP4056 Lithium Battery 18650 Charger Module 1A 3.7V

60
The TP4056 1A Li-ion Lithium Battery Charging Module – Micro USB is a 3.7V lithium battery charger module that has an onboard Micro USB interface. TP4056 With Micro-USB onboard connector, you can directly connect to the computer USB port for battery charging. If USB is not available you can use an external source voltage at IN+/IN- pads, great for DIY projects. It is small size and lightweight.

3S 40A BMS 11.1V 12.6V 18650 Lithium Battery Protection Board with 100mA Balancing Feature in Pakistan

380
The 3 Series 40A 18650 Lithium Battery Protection Board 11.1V 12.6V with Balance for Drill Motor Lipo Cell Module comes with recovery function-AUTO Recovery and Integrated 10 low load resistance MOS tube. It provides a continuous discharge of 40A, 100mA balanced current, for electric drill/sprayer/LED lights/low power inverter.  (if the cooling environment is not good, please reduce the load current use).The Scope of Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, a polymer lithium battery) where Charging voltage can be range between 16.8V to 18.1V The board operates smoothly with Continuous charge current of (upper limit): 20A. The balanced version is suitable for starting current below 80A, power 135W below the drill (with balance).

Arduino Uno R3 Dip With Cable Without Arduino Logo In Pakistan

1500
Arduino Uno R3 is a micro controller-based development board. Arduino UNO and other boards can read inputs – light on a sensor, a finger on a button, or a Twitter message – and turn it into an output – activating a motor, turning on an LED, publishing something online by utilizing this R3 kit. You can tell your Arduino UNO r3 what to do by sending a set of instructions to the micro controller on the board. To do so you use the Arduino programming language (based on Wiring), and the Arduino Software (IDE), based on Processing.

12 x 12mm x 7.5mm Push Button in Pakistan

20
Available in 5 colors Red, Black, Green, White, and Yellow. These are high-quality 12mm square momentary buttons. What we really

EGS002 EG8010 + IR2113 Pure Sine Wave Inverter SPWM Module In Pakistan

1500
  • 5V single power supply
  • 4 pin set of pure sine wave output frequency:
  • 50Hz pure sine wave of fixed frequency of 60Hz pure sine wave of fixed frequency 0-100Hz
  • pure sine wave frequency adjustable 0-400Hz pure sine wave frequency adjustable
  • Unipolar and bipolar modulation
  • 300nS dead time 500nS dead time 1.0uS dead time 1.5uS dead time
  • External 12MHz crystal oscillator
  • PWM carrier frequency 23.4KHz
  • Voltage, current, real time temperature feedback
  • Overvoltage, undervoltage, overcurrent and overheating protection
  • Soft-start mode pin setting the response time of 1S
  • Serial communication to set the output voltage, frequency and other parameters
  • External Serial LCD Module 1602 displays the inverter
  • voltage, frequency, temperature and current information

2WD 2 Wheel Smart Robot Car Chassis Kit For Arduino In Pakistan

1200
This DIY 2WD 2 Wheel smart robot car chassis kit is a cheap base for everyone interested in setting up a Raspberry Pi / Arduino-powered robot. The robot chassis with motors feel strong enough, acrylic chassis with abundant screw holes is solid enough to hold all the lot. The mechanical structure of the robot car is simple, it is easy to install. This Arduino 2-wheel robot is an educational Kit for beginners who are studying robotic projects. This robot chassis kit Arduino with coding is ideal for DIY.