WEMOS D1 Mini Pro With External Antenna In Pakistan
Wemos D1 Pro With esp8266 chip It has comparison with nodemcu, arduino wifi and other wifi modules.WEMOS D1 Mini Pro Have External Connector for an antenna with ESP8266 CP2104 WIFI Development Board With Compatible pins for WEMOS D1 Mini.
₨1350
Wemos D1 Pro With esp8266 chip It has comparison with nodemcu, arduino wifi and other wifi modules.WEMOS D1 Mini Pro Have External Connector for an antenna with ESP8266 CP2104 WIFI Development Board With Compatible pins for WEMOS D1 Mini.
Specification of WEMOS D1 Mini Pro With External Antenna:
- Microcontroller ESP-8266EX
- Operating Voltage 3.3V
- Digital I/O Pins 11
- Analog Input Pins 1(Max input: 3.2V)
- Clock Speed 80MHz/160MHz
- Flash 4M bytes
- Length 34.2mm
- Width 25.6mm
- Weight 2.5g
- NOTE: All of the IO pins have interrupt/PWM/I2C/one-wire support except D0, All of the IO pins run at 3.3V.
Package Include:
- 1 x WEMOS D1 Mini Pro With External Antenna In Pakistan
Based on 0 reviews
Be the first to review “WEMOS D1 Mini Pro With External Antenna In Pakistan”
Related products
-
IOT Boards
Nodemcu WROOM ESP32 Wifi Based Microcontroller Development Board In Pakistan
ESP32 is a prototyping board that is the work of the Shanghai-based company Espressif Systems. It incorporates the ESP32, a microprocessor tailored toward wearable electronics and IoT. It boasts integrated Wi-Fi and Bluetooth, along with an array of inbuilt antenna switches, and ultra-low power consumption. The company released the ESP8266 chip in 2014. Costing only a few dollars, this small chip is able to bridge an Arduino with a WiFi network, solving many issues that early IoT pioneers experienced.
SKU: SH20 -
IOT Boards
ESP32 Mini Development Board Wifi Bluetooth Iot Development Board In Pakistan
MH-ET Live ESP32 Mini Development Board Wifi Bluetooth IoT Development Board. This is ESP32 WiFi-BT-BLE MCU Module. ESP WROOM 32 is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding. At the core of this module is the ESP32 chip, which is designed to be scalable and adaptive. There are 2 CPU cores that can be individually controlled or powered, and the clock frequency is adjustable from 80 MHz to 240 MHz.
SKU: SH29 -
IOT Boards
38 Pin Nodemcu ESP32S Microcontroller WiFi & Bluetooth ESP WROOM 32 Development Board Module In Pakistan
IOT Boards38 Pin Nodemcu ESP32S Microcontroller WiFi & Bluetooth ESP WROOM 32 Development Board Module In Pakistan
This is an IoT board that can be used as a client mode where collected sensor data can be sent to the server using WiFi protocol. Or, used as the main server to control Led, relay or any output that is connected to this board. This board is fully supported by the Arduino IDE program.
SKU: SH21 -
IOT Boards
ESP-12 ESP8266-12e Wifi Module Wireless IoT Board Module In Pakistan
The Latest ESP-12E ESP8266 Wifi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks. It is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with full TCP/IP stack and MCU (Micro Controller Unit) capability.
SKU: SH26 -
IOT Boards
ESP8266 CP2102 NodeMcu V2 Lua WIFI IoT Development Board In Pakistan
The All-new CP2102 NodeMcu v2 ESP8266 Lua ESP8266 WIFI IoT Development Board is a fast leading edge low-cost WiFi technology. Modern high-level mature LUA based technology. This IoT development board is an integrated unit with all available resources on board. This wifi IoT board is super simple to complement your existing Arduino projects or any development board that has I/O pins available.
SKU: SH19
There are no reviews yet.