TB6600 Stepper Motor Driver Control Board Module In Pakistan
TB6600 Arduino Stepper Motor Driver is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal. TB6600 Arduino stepper motor driver has a wide range of power input, 9~42VDC power supply. And it is able to output 4A peak current, which is enough for the most of stepper motors.
USB Port Single Double Color LED Display Controller Card HD-U6b in pakistan
This LED Display Controller Card HD-U6B is for signage, store, outdoor advertising and other information display. HUIDU technology launched U-disk series control card. This colour light LED controller updated the display programs by the USB port. HD-U6B LED control card is U-disk series control card, through the USB port to update the program. This Huidu LED signs controller board is cost-effective, simple software to operate, better and rich display effects, supporting a variety of monochrome displays.
DS18B20 Waterproof Temperature Sensor Digital Temperature Probe In Pakistan
These temperature sensors work great with any microcontroller using any single digital pin. We can also connect multiple ones to the same pin. Each one has a unique 64 bits ID burn. It is useable with 3 to 5 volts systems. There is one downside of this sensor is they use the Dallas 1-wire protocol, and which is somewhat complex. This protocol requires a bunch of code to parse out the communication. When you are using this temperature sensor with a microcontroller put a 4.7K resistor to the sensing pin.
LED Digital Calendar JH3615 Digital LED Wall Clock GREEN WHITE BLUE
- Dimension: 36cm X 15.5cm
- This is the first and foremost, a clock with a sufficiently large display, By placing such a clock on the wall at home or in the office, at work, you can always, and from a distance will see the time and other information displayed on the scoreboard.
- Modern large wall digital clock with calendar and thermometer.
- Ideal for office and industrial premises.
- Modern large wall electronic LED clock with calendar and thermometer, easy to use.
- Display digital clock made of glass.
- control buttons are located on the rear side of the device.
- Ideal for office and industrial premises, watches, corridors and classrooms.
- Modern design, as well as convenient and easy operation make them easy to use.
DSN-VC288 Panel Mount DC 100V 10A Voltmeter Ammeter
This DC 100V 10A Ammeter Voltmeter is consist of 0.28 inch 5 wire red LED. With 100V DC can be measured by this meter with 0.1V resolution. This volt ammeter contains 2 wire harnesses. 2 poles with RED and BLACK lead used to provide power for the meters. this meter is portable and small in size. DSN-VC288 DC 100V 10A shows volt and ammeter at the same time on the same screen.
Arduino RPM Sensor Rotational Speed Measuring Sensor In Pakistan
The DO output interface can be directly connected to a micro-controller IO port, if there is a block detection sensor, such as the speed of the motor encoder can detect. DO modules can be connected to the relay, limit switch, and other functions, it can also with the active buzzer module, compose alarm.
A4988 Stepper Motor Driver In Pakistan
The A4988 driver Stepper Motor Driver is available in Pakistan and this is a complete micro-stepping motor driver with built-in converter, easy to operate. It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling). A4988 driver Stepper Motor Driver includes a fixed off-time current regulator, the regulator can be in slow or mixed decay mode. The converter is the key to the easy implementation of the A4988.
DRV8825 Stepper Motor Driver with Aluminum Heat Sink In Pakistan
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 micro-stepping bipolar stepper motor driver. The Stepper Driver module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board, so it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 Arduino stepper motor controller features adjustable current limiting, over-current, and over-temperature protection, and six micro-step resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
Arduino 28BYJ48 5V Stepper Motor With ULN2003 Driver In Pakistan
W5100 Ethernet Shield Network Expansion Board With Micro SD Card Slot For Arduino
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100ethernet chip (datasheet). The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.
Arduino CNC shield v3 A4988 DRV8825 Driver Expansion Board In Pakistan
This expansion board as a driver expansion board can be used for engraving machines, 3D printers. It is a total of four slots, can drive four A4988 or DRV8825 stepper motor driver, 4-axis Arduino CNC Shield v3. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.