Real Time Clock Module Tiny DS1307 RTC I2C AT24C32
Memory Real Time Clock Module Tiny DS1307 RTC I2C AT24C32 for Arduino.
₨160
This is Tiny RTC Real Time Clock DS1307 I2C IIC Module for Arduino. This best RTC Module Arduino contains a DS1307 real-time clock IC. RTC module DS1307 is one of the easiest-to-use RTCs out there, with Arduino and other libraries or you simply use I2C commands to set and retrieve the time and date. Includes a lithium coin cell battery which should be suitable for four years at least.
Along with the DS 1307 tiny real-time clock, the module also has an Atmel 24C32 EEPROM chip which is handy for storing data without worrying about power loss. RTC clock module, there is also space on the board to solder your own DS18B20 temperature sensor.
This battery backup option allows you to keep a reasonably accurate time even when your Arduino is powered off. It is very useful in data logging and other time-sensitive applications. The device uses I2C to communicate with your Arduino.
Features of RTC DS 1307 Module for Arduino:
- Two wires I2C interface.
- Hours, Minutes, Seconds, in AM and PM.
- Leap year compensation.
- Accurate Calendar up to the year 2100.
- Consumers are less than 500nA in Battery- Backup.
- 1Hz output pin.
- 56 bytes of non-volatile memory available to the user.
- 4Kb of serial electrically erasable and programmable read-only memory (EEPROM).
- Embed DS18B20 temperature sensor interface with the pull-up resistor.
Based on 0 reviews
Be the first to review “Real Time Clock Module Tiny DS1307 RTC I2C AT24C32”
Related products
-
Arduino Boards
W5100 Ethernet Shield Network Expansion Board With Micro SD Card Slot For Arduino
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100ethernet chip (datasheet). The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use the Ethernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the shield. This keeps the pin layout intact and allows another shield to be stacked on top.
SKU: SH87 -
Arduino Boards
Arduino Nano V3 ATmega328P Development Board With USB Cable In Pakistan
Arduino Nano V3 is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3. x). Arduino Nano board has more or less the same functionality as the Arduino UNO but in a different package. Arduino Nano programming module lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.
SKU: SH08 -
Arduino Boards
Arduino UNO Proto Shield With SYB-170 Mini Breadboard in Pakistan
This prototyping shield is the best out there (well, we think so, at least), and now is even better with Version R3 – updated for the most compatibility with just about all the Arduinos! It works with UNO, Mega, Leonardo, NG, Diecimila, Duemilanove, and compatible Arduinos. Yun’s and Arduino Ethernets have a chunky Ethernet jack that gets in the way of stacking, you can use the stacking headers included and it will work, just doesn’t sit nice and flat.
SKU: SH89 -
Arduino Boards
Arduino Uno R3 Dip With Cable Without Arduino Logo In Pakistan
Arduino Uno R3 is a micro controller-based development board. Arduino UNO and other boards can read inputs – light on a sensor, a finger on a button, or a Twitter message – and turn it into an output – activating a motor, turning on an LED, publishing something online by utilizing this R3 kit. You can tell your Arduino UNO r3 what to do by sending a set of instructions to the micro controller on the board. To do so you use the Arduino programming language (based on Wiring), and the Arduino Software (IDE), based on Processing.
SKU: SH02 -
Arduino Boards
Arduino Compatible USB Host Shield In Pakistan
The Arduino Compatible USB Host Shield is based on the MAX3421E, which is a USB peripheral/host controller containing the digital logic and analog circuitry necessary to implement a full-speed USB peripheral or a full-/low-speed host compliant to USB specification rev 2.0. it is compatible with more Arduinos – not only UNO and Duemilanove but also Mega and Mega 2560 work with a Standard variant of this shield out of the box. No more SPI re-wiring and code modifications – just solder included stackable connectors (2×3 ICSP connector’s female side should be facing down), plug and play! Using Arduino Compatible USB HOST function, let your Arduino communicate with other USB devices, and supports USB HUB function.USB Host shield adds USB Host capabilities to the Arduino board.
SKU: SH88
There are no reviews yet.