ESP-12 ESP8266-12e Wifi Module Wireless IoT Board Module In Pakistan
The Latest ESP-12E ESP8266 Wifi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks. It is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with full TCP/IP stack and MCU (Micro Controller Unit) capability.
₨330
The Latest ESP-12E ESP8266 Wifi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks. It is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with full TCP/IP stack and MCU (Micro Controller Unit) capability.
Specification of ESP-12 ESP8266-12e Wifi Module Wireless IoT Board Module:
- Compatible with ESP-12（ESP-202）
- Communication interface voltage: 3.3V
- Working current: 240mA(MAX)
- Serial port baud rate: 115200 (default), can be modified to other values by AT command
- Serial communication format: 8N1
- IO Port Package: Both SMD and Inline package are available, and the pin pitch is 2.0mm.
- Antenna Type: Built-in PCB antenna is available
- Wireless Network Mode: station / softAP / SoftAP + station
- Wireless criteria: 802.11 b / g / n
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- It is very easy to develop projects with AT commands
- Surface Mount Package with 2mm Pitch Pads
- Mulitple GPIO’s for all your sensor needs
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
- +19.5dBm output power
- Power down leakage current of <10uA
- Integrated low power 32-bit CPU could be used as an application processor
- SDIO 1.1/2.0, SPI, UART
- STBC, 1×1 MIMO, 2×1 MIMO
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Wake up and transmit packets in < 2ms
- Standby power consumption of < 1.0mW (DTIM3)
- Dimensions: 25 x 17 x 4 (LxWxH) mm
- Weight: 2 gm.
Package Include:
- 1 x ESP-12 ESP8266-12e Wifi Module Wireless IoT Board Module In Pakistan
Based on 0 reviews
Be the first to review “ESP-12 ESP8266-12e Wifi Module Wireless IoT Board Module In Pakistan”
Related products
-
IOT Boards, Instruments And Tools
Arduino Camera OV7670 640×480 VGA CMOS Camera Image Sensor Module In Pakistan
IOT Boards, Instruments And ToolsArduino Camera OV7670 640×480 VGA CMOS Camera Image Sensor Module In Pakistan
Arduino Camera OV7670 640×480 VGA CMOS Camera Image Sensor Module is a low-cost image sensor, DSP that can operate at a maximum of 30 fps and 640 x 480 (“VGA”) resolutions, equivalent to 0.3 Megapixels. The captured image can be pre-processed by the DSP before sending it out. This pre-processing can be configured via the Serial Camera Control Bus (SCCB). Omni Vision OV7670 CMOS VGA (640 x 480) CAMERA-CHIP Sensor with Omni Pixel technology 3.3V DC Input Voltage. working Temp. 0-50 Degree Celsius All Glass Lenses, Lens(including seat) is Magnesium Alloy material.
SKU: SH-282 -
IOT Boards
ESP32 Mini Development Board Wifi Bluetooth Iot Development Board In Pakistan
MH-ET Live ESP32 Mini Development Board Wifi Bluetooth IoT Development Board. This is ESP32 WiFi-BT-BLE MCU Module. ESP WROOM 32 is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding. At the core of this module is the ESP32 chip, which is designed to be scalable and adaptive. There are 2 CPU cores that can be individually controlled or powered, and the clock frequency is adjustable from 80 MHz to 240 MHz.
SKU: SH29 -
IOT Boards
ESP32 CAM MB WIFI Bluetooth Development Board Micro USB Interface CH340G USB to Serial Port And OV2640 Camera Module In Pakistan
IOT BoardsESP32 CAM MB WIFI Bluetooth Development Board Micro USB Interface CH340G USB to Serial Port And OV2640 Camera Module In Pakistan
The HK-ESP32-CAM-MB module is a small camera module with a size of 39.8*27*. This module can work independently as the smallest system. A new WiFi+Bluetooth dual-mode development board based on ESP32 design, using PCB on-board antenna, with 2 high-performance 32-bit LX6CPU, using 7-level pipeline architecture, main frequency adjustment range 80MHz to 240Mhz. Ultra-low power consumption, deep sleep current is as low as 6mA. It is an ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleHK-ESP32-CAM-MB adopts Micro USB interface, convenient and reliable connection method, convenient to apply to various IoT hardware terminal occasions.
SKU: SH25 -
IOT Boards
ESP8266 CP2102 NodeMcu V2 Lua WIFI IoT Development Board In Pakistan
The All-new CP2102 NodeMcu v2 ESP8266 Lua ESP8266 WIFI IoT Development Board is a fast leading edge low-cost WiFi technology. Modern high-level mature LUA based technology. This IoT development board is an integrated unit with all available resources on board. This wifi IoT board is super simple to complement your existing Arduino projects or any development board that has I/O pins available.
SKU: SH19 -
IOT Boards
WeMos D1 R1 WiFi ESP8266 Development Board In Pakistan
The UNO Based ESP8266 Nodemcu Development Board in the form of the Arduino UNO board format. This WeMos D1 R1 board is compatible with the Arduino IDE and with NodeMCU.The board is controlled by the ESP8266 chip (a 32-Bit processor) and has a larger flash memory compared to an Arduino Uno. It consists of 11 digital I/O pins and 1 analog (input) pin. the board can be connected using a Micro-B type USB cable.
SKU: SH31
There are no reviews yet.