WeMos D1 R1 WiFi ESP8266 Development Board In Pakistan
The UNO Based ESP8266 Nodemcu Development Board in the form of the Arduino UNO board format. This WeMos D1 R1 board is compatible with the Arduino IDE and with NodeMCU.The board is controlled by the ESP8266 chip (a 32-Bit processor) and has a larger flash memory compared to an Arduino Uno. It consists of 11 digital I/O pins and 1 analog (input) pin. the board can be connected using a Micro-B type USB cable.
₨900
The UNO Based ESP8266 Nodemcu Development Board in the form of the Arduino UNO board format. This WeMos D1 R1 board is compatible with the Arduino IDE and with NodeMCU.The board is controlled by the ESP8266 chip (a 32-Bit processor) and has a larger flash memory compared to an Arduino Uno. It consists of 11 digital I/O pins and 1 analog (input) pin. the board can be connected using a Micro-B type USB cable.
Specification of WeMos D1 R1 WiFi ESP8266 Development Board:
- Based on ESP-8266EX.
- Arduino compatible, using Arduino IDE to program.
- Support OTA wireless upload.
- Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
- The direct use of Arduino IDE development, the same operation with Arduino UNO.
Package Include:
- 1 x WeMos D1 R1 WiFi ESP8266 Development Board In Pakistan
Based on 0 reviews
Be the first to review “WeMos D1 R1 WiFi ESP8266 Development Board In Pakistan”
Related products
-
IOT Boards, Instruments And Tools
Arduino Camera OV7670 640×480 VGA CMOS Camera Image Sensor Module In Pakistan
IOT Boards, Instruments And ToolsArduino Camera OV7670 640×480 VGA CMOS Camera Image Sensor Module In Pakistan
Arduino Camera OV7670 640×480 VGA CMOS Camera Image Sensor Module is a low-cost image sensor, DSP that can operate at a maximum of 30 fps and 640 x 480 (“VGA”) resolutions, equivalent to 0.3 Megapixels. The captured image can be pre-processed by the DSP before sending it out. This pre-processing can be configured via the Serial Camera Control Bus (SCCB). Omni Vision OV7670 CMOS VGA (640 x 480) CAMERA-CHIP Sensor with Omni Pixel technology 3.3V DC Input Voltage. working Temp. 0-50 Degree Celsius All Glass Lenses, Lens(including seat) is Magnesium Alloy material.
SKU: SH-282 -
IOT Boards
ESP-12 ESP8266-12e Wifi Module Wireless IoT Board Module In Pakistan
The Latest ESP-12E ESP8266 Wifi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks. It is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with full TCP/IP stack and MCU (Micro Controller Unit) capability.
SKU: SH26 -
IOT Boards
38 Pin Nodemcu ESP32S Microcontroller WiFi & Bluetooth ESP WROOM 32 Development Board Module In Pakistan
IOT Boards38 Pin Nodemcu ESP32S Microcontroller WiFi & Bluetooth ESP WROOM 32 Development Board Module In Pakistan
This is an IoT board that can be used as a client mode where collected sensor data can be sent to the server using WiFi protocol. Or, used as the main server to control Led, relay or any output that is connected to this board. This board is fully supported by the Arduino IDE program.
SKU: SH21 -
IOT Boards
WeMos D1 Mini WIFI Development Board ESP8266 In Pakistan
This IOT Wemos D1 Mini WIFI Internet Of Things Development Board based on ESP8266 esp12e, Wemos d1 Mini is a WIFI board based on ESP-8266EX. 11 digital input/output pins, all pins have interrupt/PWM/I2C/one-wire supported(except D0) 1 analog input(3.3V max input) and a Micro USB connection. The Wemos D1 Mini is a great board to develop WiFi-based IoT Projects. It uses the popular ESP8266 Module for its IoT operations.
SKU: SH27 -
IOT Boards
ESP01 ESP8266 WiFi Module In Pakistan
The ESP 01 or ESP8266 WiFi Module is a self-contained SOC. ESP8266 serial module has integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The esp8266 wifi module Arduino is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The esp 01 connect to wifi module is an extremely cost-effective board with a huge, and ever-growing, community.
SKU: SH22
There are no reviews yet.