DS18B20 18B20 Temperature Sensor In Pakistan

400
This is the latest Digital Temperature Sensor DS18B20 from Maxim IC (but sourced from Sparkfun). The DS18B20 sensor measures temperature in degrees Celsius with 9 to 12-bit precision, -55C to 125C (+/-0.5C). Each temp sensor has a unique 64-bit serial number programmed into it which allows for a huge number of sensors to be used on one data bus. The best Arduino temperature sensor is a wonderful part that is the cornerstone of many data-logging and temperature control projects.

DS18B20 Waterproof Temperature Sensor Digital Temperature Probe In Pakistan

280
These temperature sensors work great with any microcontroller using any single digital pin. We can also connect multiple ones to the same pin. Each one has a unique 64 bits ID burn. It is useable with 3 to 5 volts systems. There is one downside of this sensor is they use the Dallas 1-wire protocol, and which is somewhat complex. This protocol requires a bunch of code to parse out the communication. When you are using this temperature sensor with a microcontroller put a 4.7K resistor to the sensing pin.

GY-61 Triple Axis Accelerometer module ADXL335 in Pakistan

1600
The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.

HC 05 Bluetooth Module In Pakistan

750
HC-05 Bluetooth Module In PakistanTTL Module (With EN Pin) Breakout is the latest Bluetooth wireless serial Module. This version of the popular Bluetooth module uses the HC-05. These modems work as a serial (RX/TX) pipe. Any serial stream from 9600 to 115200bps can be passed seamlessly from your computer to your target. The remote unit can be powered from 3.3V up to 6V for easy battery attachment. All signal pins on the remote unit are 3V-6V tolerant. No level shifting is required.

HC 06 Bluetooth Module For Arduino In Pakistan

750
HC-06 / HC 06 / HC06 Bluetooth Module Serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish a connection between MCU and GPS, PC to your embedded project and etc.

HC-SR04 HC SR04 Arduino Ultrasonic Sensor In Pakistan

190
HC SR04 HC-SR04 Ultrasonic Sensor also called HC-SR04 Ultrasonic Range Finder. Ultrasonic Sensor module HC-SR04 provides 2cm – 400cm non-contact measurement function, the ranging accuracy can reach to 3mm. The modules include ultrasonic transmitters, receiver and control circuit.

HC-SR501 PIR Motion Sensor Module in Pakistan

180
The PIR Motion Sensor Detector Module HC-SR501 allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor’s range. It is often referred to using “PIR”, “Pyroelectric”, “Passive Infrared” and “IR Motion” sensor. The module has an onboard pyroelectric sensor, conditioning circuitry, and a dome-shaped Fresnel lens. It has a delay time adjustment Potentiometer and sensitivity adjustment Potentiometer. Repeat Trigger Selection solderable Jumper is also available.

IR Flame Sensor Module in Pakistan

150
Flame Sensor Module Fire Sensor Module infrared Receiver Ignition source detection module This tiny Flame sensor infrared receiver module ignition source detection module is Arduino compatible can use to detect flame or wavelength of the light source within 760nm~1100nm also useful for Lighter flame detect at the distance 80cm. Greater the flame, farther the test distance.

IR Infrared Obstacle Avoidance Sensor Module In Pakistan

130
The Obstacle Detector sensor module is perfectly adaptable to the environment light, IR Object Avoidance Sensor has a pair of infrared transmitting and receiving tubes; transmitting tube emits infrared in a certain frequency, when detecting direction meets with obstacles(reflecting surface), reflected infrared will be received by the receiving tube; after the comparator circuit processing, the green indicator will light up, at the same time signal output interface to output digital signal(1 low-level signal). Users can adjust the detection distance through the potentiometer knob, effective distance range 2~30cm and working voltage is 3.3V to 5V. The Obstacle Avoidance module LM393 can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, black and white line tracking, and so on many occasions.

ir-08h Infrared Obstacle avoidance sensor module KY032 for Arduino

170
Arduino KY-032 Obstacle avoidance sensor modules Infrared Obstacle Avoidance Sensor returns a signal when it detects an object in range. The range of the sensor is around 2-40 cm distance. It operates at 3.5 to 5 volts at around 20 milliamps. The Obstacle Avoidance Sensors usually come in two types – with 3 and 4 pins. This is the 4 pin version Sensor Module and has an optional Enable pin. An infrared obstacle avoidance sensor is designed to detect obstacles or the difference in reflective services.

KY-022 Arduino Infrared Sensor Infrared Receiver Module 38khz Receiver In Pakistan

100
Infrared IR Sensor Receiver Module for Arduino adopts 1838 infrared receiving head. Light resistance, strong electromagnetic interference, built-in infrared dedicated IC, can work under 500 lux light intensity.

Laser Module Red Dot 5mW 650nm Adjustable

430
  • Wavelength:650nm
  • Output Power:5mw
  • Working Voltage:3 – 5V
  • Laser Shape: cross
  • Material and Color: Metal
  • Red Laser DOT Diode Module 12x35mm