BMS 3S 60A Battery Management System With Protection

2 Axis Pan Tilt Brackets For Camera/Sensors for Servo SG90S MG90S.based 2 axis pan and tilt mechanism for mounting wireless/ wired camera and sensors on robot assembly. Panning , rolling and tilting is achieved by controlling Servo motors using PPM pulses. Suitable for DIY panning and tilting application in projects. Supports varied array of sensors and measurement device for different project applications.

1602 16x2 Blue Character LCD Display For Arduino is a basic 16 character by 2 lines Alphanumeric display. This LCD 16x2 Character LCD Display has White text on a blue background. Utilizes the extremely common HD44780 parallel interface chipset. Interface code is freely available. You will need Minimum 6 general I/O pins to interface to this LCD screen. Includes LED backlight. Works in 4bit and 8 bit Mode.

The Obstacle Detector sensor module is perfectly adaptable to the environment light, IR Object Avoidance Sensor has a pair of infrared transmitting and receiving tubes; transmitting tube emits infrared in a certain frequency, when detecting direction meets with obstacles(reflecting surface), reflected infrared will be received by the receiving tube; after the comparator circuit processing, the green indicator will light up, at the same time signal output interface to output digital signal(1 low-level signal). Users can adjust the detection distance through the potentiometer knob, effective distance range 2~30cm and working voltage is 3.3V to 5V. The Obstacle Avoidance module LM393 can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, black and white line tracking, and so on many occasions.

Mounting Bracket Holder Stand is specifically designed for the HC-SR04 Ultrasonic Sensor Module. With this ultrasonic sensor you can attach the le to your application such as small robots or DIY projects very quickly and conveniently. This best mount bracket is made from good quality Acrylic. This mounting holder has mounting holes of a diameter of 3.8mm. Use this Arduino distance measuring sensor to easily attach your ultrasonic distance sensor to your robots, onto a servo for panning, and anywhere else you’d like. 90 degree mounting with 3 screw holes at the base and 4 screw holes for the ultrasonic sensor itself.