PCF8574 IIC I2C Serial Interface Adapter Module IIC I2C LCD Module In Pakistan
This board has a PCF8574 I2C chip that converts I2C serial data to parallel data for the LCD display. There are many examples on the internet for using this board with Arduino. Do a search for “Arduino LCD PCF8574“. The I2C address is 0x3F by default, but this can be changed via 3 solder jumpers provided on the board. This allows up to 3 LCD displays to be controlled via a single I2C bus (giving each one it’s own address).
₨220
This board has a PCF8574 I2C chip that converts I2C serial data to parallel data for the LCD display. There are many examples on the internet for using this board with Arduino. Do a search for “Arduino LCD PCF8574“. The I2C address is 0x3F by default, but this can be changed via 3 solder jumpers provided on the board. This allows up to 3 LCD displays to be controlled via a single I2C bus (giving each one it’s own address).
Specification of PCF8574 IIC I2C Serial Interface Adapter Module IIC I2C LCD Module:
- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- The backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
- Size ：41.6 x 19.2 mm.
Package Include:
- 1 x PCF8574 IIC I2C Serial Interface Adapter Module IIC I2C LCD Module In Pakistan
Based on 0 reviews
Be the first to review “PCF8574 IIC I2C Serial Interface Adapter Module IIC I2C LCD Module In Pakistan”
Related products
-
Sensor & Modules
HC-SR04 HC SR04 Arduino Ultrasonic Sensor In Pakistan
HC SR04 HC-SR04 Ultrasonic Sensor also called HC-SR04 Ultrasonic Range Finder. Ultrasonic Sensor module HC-SR04 provides 2cm – 400cm non-contact measurement function, the ranging accuracy can reach to 3mm. The modules include ultrasonic transmitters, receiver and control circuit.
SKU: SH43 -
Sensor & Modules
2 Axis Pan BIT Tilt Brackets For SG90 And MG90 Servo Motor In Pakistan
2 Axis Pan Tilt Brackets For Camera/Sensors for Servo SG90S MG90S.based 2 axis pan and tilt mechanism for mounting wireless/ wired camera and sensors on robot assembly. Panning , rolling and tilting is achieved by controlling Servo motors using PPM pulses. Suitable for DIY panning and tilting application in projects. Supports varied array of sensors and measurement device for different project applications.
SKU: SH100 -
Sensor & Modules
ir-08h Infrared Obstacle avoidance sensor module KY032 for Arduino
Arduino KY-032 Obstacle avoidance sensor modules Infrared Obstacle Avoidance Sensor returns a signal when it detects an object in range. The range of the sensor is around 2-40 cm distance. It operates at 3.5 to 5 volts at around 20 milliamps. The Obstacle Avoidance Sensors usually come in two types – with 3 and 4 pins. This is the 4 pin version Sensor Module and has an optional Enable pin. An infrared obstacle avoidance sensor is designed to detect obstacles or the difference in reflective services.
SKU: SH37 -
Sensor & Modules
HC-SR501 PIR Motion Sensor Module in Pakistan
The PIR Motion Sensor Detector Module HC-SR501 allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor’s range. It is often referred to using “PIR”, “Pyroelectric”, “Passive Infrared” and “IR Motion” sensor. The module has an onboard pyroelectric sensor, conditioning circuitry, and a dome-shaped Fresnel lens. It has a delay time adjustment Potentiometer and sensitivity adjustment Potentiometer. Repeat Trigger Selection solderable Jumper is also available.
SKU: SH39 -
Sensor & Modules
Digital LDR Sensor Module In Pakistan
The Digital Light Dependent Resistor LDR Sensor Module is used to detect the presence of light / measuring the intensity of light. The output of the LDR module goes high in the presence of light and it becomes low in the absence of light. You can adjust the threshold (sensitivity) of the digital output by tuning the onboard variable resistor (potentiometer). Simple usage as it is the digital output, so you will know is the light present and decide what to do with it.LDR photoresistor sensor module comes with an M3 mounting hole for ease of attaching it to an object. Onboard, it provides an LDR, high sensitivity and commonly being used for light detection.
SKU: SH41
There are no reviews yet.