Soil Moisture Sensor
Original price was: ₨140.₨125Current price is: ₨125.
-8%
BMS 3S 60A Battery Management System With Protection
Original price was: ₨400.₨370Current price is: ₨370.
-
PCB BMS Protection Board
-
Li-ion Lithium Battery Charger Protection Board
-
Balance Charging Module
Description
3S 60A Protection Charging Board Product Description
Product parameters:
Charging voltage : 12.6V-13V
Maximum working current : 60A ( heat dissipation conditions are very good )
Continuous charging current ( upper limit ) : 20A
Continuous discharge current ( upper limit ) : 40A
Overcurrent protection : 125A
Overcharge detection : 12.8V ( for 3 groups of batteries )
Overcharge release : 12.3V ( for 3 groups of batteries Over discharge detection : 2.4V ( for 1 group of batteries)
Over discharge release : 3.0V ( for 1 group of batteries )
Short circuit protection : Yes
Working temperature : -40℃ ~ +85℃
Storage conditions : -40℃ ~ +125℃
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
1 Channel Relay Module For Arduino In Pakistan
Channel 5V Arduino Relay Module for Arduino PIC AVR DSP ARM. Single-channel relay, a wide range of microcontrollers such as Arduino, AVR, PIC, ARM and so on can control it. The 5V relay module circuit, each one needs 15mA-20mA driver current and equipped with high current relay: DC 30V / 10A, AC 250V / 10A. This one channel module has a standard interface that can be compatible with a microcontroller.
2 Axis Pan BIT Tilt Brackets For SG90 And MG90 Servo Motor In Pakistan
2 Axis Pan Tilt Brackets For Camera/Sensors for Servo SG90S MG90S.based 2 axis pan and tilt mechanism for mounting wireless/ wired camera and sensors on robot assembly. Panning , rolling and tilting is achieved by controlling Servo motors using PPM pulses. Suitable for DIY panning and tilting application in projects. Supports varied array of sensors and measurement device for different project applications.
Arduino 4 Channel Relay Module Board In Pakistan
This is a 5V 4-channel relay interface board, and each channel needs a 15-20mA driver current. This 4-way relay module can be used to control various appliances and equipment with large current. This four-channel relay module is equipped with high-current relays that work under AC250V 10A or DC30V 10A. 5 volts relay driver module has a standard interface that can be controlled directly by the microcontroller. This relay module board allows a wide range of microcontrollers such as Arduino, AVR, PIC, ARM with digital outputs to control larger loads and devices like AC or DC Motors, electromagnets, solenoids, and incandescent light bulbs.
AS-10-220 Day Night Automatic Light Control Sun Switch LDR In Pakistan
The AS-10-220 sun switch is a reliable and efficient way to control your outdoor lighting. This smart device utilizes a built-in light sensor to detect the presence of natural sunlight, automatically turning your lights on at dusk and off at dawn. The AS-10-220 is easy to install and compatible with a wide range of lighting systems, making it a versatile solution for any outdoor lighting needs. Plus, with its durable construction and weather-resistant design, the AS-10-220 is built to last. Upgrade your outdoor lighting with the AS-10-220 sun switch today!.
IR Infrared Obstacle Avoidance Sensor Module In Pakistan
The Obstacle Detector sensor module is perfectly adaptable to the environment light, IR Object Avoidance Sensor has a pair of infrared transmitting and receiving tubes; transmitting tube emits infrared in a certain frequency, when detecting direction meets with obstacles(reflecting surface), reflected infrared will be received by the receiving tube; after the comparator circuit processing, the green indicator will light up, at the same time signal output interface to output digital signal(1 low-level signal). Users can adjust the detection distance through the potentiometer knob, effective distance range 2~30cm and working voltage is 3.3V to 5V. The Obstacle Avoidance module LM393 can be widely used in robot obstacle avoidance, obstacle avoidance car, line count, black and white line tracking, and so on many occasions.
PCF8574 IIC I2C Serial Interface Adapter Module IIC I2C LCD Module In Pakistan
This board has a PCF8574 I2C chip that converts I2C serial data to parallel data for the LCD display. There are many examples on the internet for using this board with Arduino. Do a search for “Arduino LCD PCF8574“. The I2C address is 0x3F by default, but this can be changed via 3 solder jumpers provided on the board. This allows up to 3 LCD displays to be controlled via a single I2C bus (giving each one it’s own address).
PIR8 Controller 12V 24V PIR Sensor LED Dimmer Switch Motion Timer in Pakistan
Infrared detection controller, adopt an infrared detection way to control load switch.LED Lighting motion sensing switch which provides 1 to 10 minute OFF delay timing function. The sensor switch activates ON when a body in motion enters the field of view with an ON time hold that is adjustable from 1 to 10 minutes after motion has ceasedPIR (Passive InfraRed, IR) sensor has an effective range of 16 feet and diminished sensing of a moving human body to 26 feet.
TTP223 Capacitive Touch Sensor Switch Button Module
This Arduino touch sensor module based on the dedicated TTP223 touch sensor IC. The TTP223 capacitive touch switch provides a single integrated touch sensing area of 11 x 10.5mm with a sensor range of ~5mm. An on-board LED will give a visual indication of when the sensor is triggered. When triggered the module's output will switch from its idle low state to high (default operation). Solder jumpers allow for reconfiguring its mode of operation to be either active low or toggle output.
Reviews
There are no reviews yet.