LED Digital Calendar JH3615 Digital LED Wall Clock GREEN WHITE BLUE
- Dimension: 36cm X 15.5cm
- This is the first and foremost, a clock with a sufficiently large display, By placing such a clock on the wall at home or in the office, at work, you can always, and from a distance will see the time and other information displayed on the scoreboard.
- Modern large wall digital clock with calendar and thermometer.
- Ideal for office and industrial premises.
- Modern large wall electronic LED clock with calendar and thermometer, easy to use.
- Display digital clock made of glass.
- control buttons are located on the rear side of the device.
- Ideal for office and industrial premises, watches, corridors and classrooms.
- Modern design, as well as convenient and easy operation make them easy to use.
LED Digital Calendar JH3615 Digital LED Wall Clock RED
- Dimension: 36cm X 15.5cm
- This is the first and foremost, a clock with a sufficiently large display, By placing such a clock on the wall at home or in the office, at work, you can always, and from a distance will see the time and other information displayed on the scoreboard.
- Modern large wall digital clock with calendar and thermometer.
- Ideal for office and industrial premises.
- Modern large wall electronic LED clock with calendar and thermometer, easy to use.
- Display digital clock made of glass.
- control buttons are located on the rear side of the device.
- Ideal for office and industrial premises, watches, corridors and classrooms.
- Modern design, as well as convenient and easy operation make them easy to use.
Liitokala Lii-500 Lithium battery Charger in Pakistan
- Input: DC 12V / 2A(min.)
- Charge output: Li-Ion 4.2V 300mA/500mA/700mA/1000mA * 4
- Ni-MH/Cd 1.48V 300mA/500mA/700mA/1000mA * 4
- Charging cut-off voltage: lithium-ion battery 4.2 ± 0.05V
- Discharge output: 500mA cutoff Li-Ion 2.8V/ NiMH 0.9V
- USB output: 5V 1000mA (only with Li-Ion 3.7V battery inserted)
- For battery sizes: diameter 8mm-26mm; height 34mm-71mm
- NiMH/Cd AAA/Micro, AA/Mignon, C/ Bady, Sub- C, A
- Li-Ion 26650, 22650, 18650,18490, 18500,
- 17500, 17355, 16340(RCR123), 14500, 10440
- Dimensions: L*W*H / 162*96*36mm
LM2596 2A Buck Step-down Power Converter Module DC 4.0~40 to 1.3-37V LED Voltmeter
Lm2596hv (High voltage) Adjustable Step Down Dc To Dc Buck Converter Module
LM393 Reed Sensor Module for Arduino in Pakistan
Arduino Boards, IOT Boards, Programer And Microcontroller, Consumer Electronics, Industrial Products, Instruments And Tools
LM7805 5V Voltage Regulator IC TO-220 | Smart Hall Road Pakistan
Lm7905 Negative Voltage Regulator in Pakistan
Mach3 Breakout Board 5 Axis CNC Breakout Board In Pakistan
MACH3 Interface Board CNC 5 Axis with Optocoupler latest upgrade 5 axis breakout board is specially designed for the CNC single-axis 2-phase stepper driver controller, such as TB6560, M542, M542H, MA860H, 2M542, 2M982, DM542(A), DM860(A), etc. single-axis stepper driver controller series. With this 5-axis breakout board, any 1-5 single-axis stepper driver controllers can be directly controlled by the PC via the MACH3, EMC2, KCAM4, etc.
MAX485 RS485 Transceiver Module TTL to RS485 Interface Module In Pakistan
MAX485 RS485 TTL To RS-485 MAX485CSA Transceiver Module is based on the Maxim MAX485 IC to allow serial communication over very long cable runs (up 4000 feet / 1200 meters). MAX485 converter board, serial data can be transmitted in both directions (half-duplex) at a data rate up to 2.5Mbps. The max485 TTL to rs485 converter module operates from a standard 5V power supply and uses 5V logic levels allowing them to be interfaced to the hardware serial ports of microcontrollers such as Arduino/PIC etc. The direction of communication can be controlled with just one digital pin (see diagram). RS485 to TTL module is also possible to connect multiple modules together for communication between 2 or more devices. For even greater distances two modules can be configured as a repeater.
