Super Speed Mini Sui Gas Pump Sucking Compressor Pressure Machine TX 2000
Original price was: ₨1500.₨1300Current price is: ₨1300.
5A range Current Sensor Module ACS712 in Pakistan
₨270
- This current module measures positive and negative 5 amps.
- This current module operated on a single supply of 5V.
- Its output voltages proportional to AC or DC currents.
- This module contains an on-board power indicator.
- It has nearly zero magnetic hysteresis.
- This sensor contains factory-trimmed for accuracy.
- This module has an extremely stable output offset voltage.
Description
The ACS712 5A Range Current Sensor Module / Hall Sensor device consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage.
Specifications and Features :
- Module Dimensions: 31 x 13 x 14 mm (LxWxH)
- Weight: 3 gm.
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: -5A~ 5A
- Sensitivity: 66mV/A
- The current sensor chips: ACS712_ELC-05B.
- Pin 5V power supply, onboard power indicator.
- There is no the detection current through, the output voltage is VCC
Additional information
| Weight | 0.1 kg |
|---|
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Arduino 4 Channel Relay Module Board In Pakistan
This is a 5V 4-channel relay interface board, and each channel needs a 15-20mA driver current. This 4-way relay module can be used to control various appliances and equipment with large current. This four-channel relay module is equipped with high-current relays that work under AC250V 10A or DC30V 10A. 5 volts relay driver module has a standard interface that can be controlled directly by the microcontroller. This relay module board allows a wide range of microcontrollers such as Arduino, AVR, PIC, ARM with digital outputs to control larger loads and devices like AC or DC Motors, electromagnets, solenoids, and incandescent light bulbs.
AT-09 HM10 4.0 BLE Bluetooth Module In Pakistan
This AT-09 HM10 / HM-10 4.0 BLE Bluetooth Serial CC2540 CC2541 Module For IOS 6/Android 4.3 contains a BLE chip (a CC2540/CC2541). This AT-09 HM-10 Bluetooth Module allows performing serial communication with the BLE chip thanks to an Rx and a Tx pin. This 4.0 Bluetooth Serial Module is also very similar to the HM-10 module and is also compatible with it. So if you have some experience with the latter, you will get started quickly with the AT-09.
DS18B20 Waterproof Temperature Sensor Digital Temperature Probe In Pakistan
These temperature sensors work great with any microcontroller using any single digital pin. We can also connect multiple ones to the same pin. Each one has a unique 64 bits ID burn. It is useable with 3 to 5 volts systems. There is one downside of this sensor is they use the Dallas 1-wire protocol, and which is somewhat complex. This protocol requires a bunch of code to parse out the communication. When you are using this temperature sensor with a microcontroller put a 4.7K resistor to the sensing pin.
HC-SR501 PIR Motion Sensor Module in Pakistan
The PIR Motion Sensor Detector Module HC-SR501 allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor’s range. It is often referred to using “PIR”, “Pyroelectric”, “Passive Infrared” and “IR Motion” sensor. The module has an onboard pyroelectric sensor, conditioning circuitry, and a dome-shaped Fresnel lens. It has a delay time adjustment Potentiometer and sensitivity adjustment Potentiometer. Repeat Trigger Selection solderable Jumper is also available.
TTP223 Capacitive Touch Sensor Switch Button Module
This Arduino touch sensor module based on the dedicated TTP223 touch sensor IC. The TTP223 capacitive touch switch provides a single integrated touch sensing area of 11 x 10.5mm with a sensor range of ~5mm. An on-board LED will give a visual indication of when the sensor is triggered. When triggered the module's output will switch from its idle low state to high (default operation). Solder jumpers allow for reconfiguring its mode of operation to be either active low or toggle output.
Ultrasonic Distance Sensor Mounting Bracket Holder Stand In Pakistan
Mounting Bracket Holder Stand is specifically designed for the HC-SR04 Ultrasonic Sensor Module. With this ultrasonic sensor you can attach the le to your application such as small robots or DIY projects very quickly and conveniently. This best mount bracket is made from good quality Acrylic. This mounting holder has mounting holes of a diameter of 3.8mm. Use this Arduino distance measuring sensor to easily attach your ultrasonic distance sensor to your robots, onto a servo for panning, and anywhere else you’d like. 90 degree mounting with 3 screw holes at the base and 4 screw holes for the ultrasonic sensor itself.
Reviews
There are no reviews yet.