30CM Raspberry Pi FFC Camera Cable In Pakistan

5V Raspberry Pi Fan keeps Raspberry Pi computers truly cool with a dedicated 5V, 3.3mm square fan. This Raspberry Pi Fan is ideal when you’re running it near 100% load all the time. Mounts to our Raspberry Pi S.A.F.E. (for B+ and V2) top plate (4-40 x 5/8″ bolts & nuts not included). We’ve successfully used the onboard expansion port header to power our fan installations. Lift the retainer tab on the ground (black lead) and pull it out, and plug the connector (with the remaining red wire) to the corner-most pin. The ground pin can be then mounted to the pin 2 spaces down from it to give you a solid 5V for the fan.

Raspberry Pi Zero-W V1.3 Development Board is the latest version of Raspberry Pi Zero W (Wireless), if you are looking for this, get it here. Zero-W V1.3 Development Board is a super cheap single-board computer. You get a working computer, it is cheaper than any Arduino controller board with the 32-bit processor, and it comes with WiFi and Bluetooth ready.

This 5MP Raspberry Pi Camera Module Rev 1.3 is capable of 1080p video and still images and connects directly to your Raspberry Pi. Raspberry Pi Camera Module Connect the included ribbon cable to the CSI (Camera Serial Interface) port on your Raspberry Pi, boot up the latest version of Raspbian and you are good to go The board itself is tiny, at around 25mm x 20mm x 9mm and weighing in at just over 3g, making it perfect for mobile or other applications where size and weight are important. The sensor has a native resolution of 5 megapixels and has a fixed focus lens onboard. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.