Electronic Devices And Components
Showing 25–48 of 90 results
-
Cells And Cell Holder
3x 18650 Battery Cell Case Holder in Pakistan
3x 18650 Battery Cell Case Holder puts the batteries in series so you have 3x the voltage of a 18650 battery. 3x 18650 Battery Cell Case Holder battery holder is suitable for standard 18650 cells, as well as 18650 cells with protection circuit. This holder provides output leads approximately 6″ long for soldering or connecting to your circuit. There are mounting holes in the bottom to secure to a panel, bulkhead or mounting plat.
SKU: SH123 -
Voltage Regulator Module
4A Buck-Boost Converter Module Adjustable Buck Boost Board With LCD Display
LCD input and output voltage, output current output power; Input anti-reverse protection, reverse connection will not burn. It can be step-up and step-down, the output voltage 0.5-30V arbitrary regulation, limiting the current 0-4A arbitrary regulation. Output anti-intrusion, the battery charge without additional anti-reflux diodes, Button control output ON / OFF status, and you can set the power-on default is ON or OFF.
SKU: SH58 -
BMS Circuit
4s BMS 4S 40a BMS Li-ion Battery Protection Board Balanced Version in Pakistan
The 4 Series 40A 18650 Lithium Battery Protection Board 14.8V 16.8V with Balance for Drill Motor Lipo Cell Module comes with recovery function – AUTO Recovery and Integrated 10 low load resistance MOS tube. It provides a continuous discharge of 40A, 100mA balanced current, for electric drill/sprayer/LED lights/low power inverter. (If the cooling environment is not good, please reduce the load current use).The Scope of Nominal voltage of 3.6V, 3.7V lithium battery (including 18650, 26650, a polymer lithium battery) where Charging voltage can be range between 16.8V to 18.1V The board operates smoothly with Continuous charge current of (upper limit): 20A. The balanced version is suitable for starting current below 80A, power 135W below the drill (with balance).
SKU: SH118 -
Cells And Cell Holder
4x 18650 Battery Cell Holder Storage Box Case in Pakistan
The battery holder case puts the batteries in series so that you have 4x the voltage of a 18650 battery. (About 15V at a cell voltage of 3.7V). This 4x cells plastic storage holder is suitable for standard 18650 cells, as well as 18650 cells with a protection circuit. This is a great option for when you want to take the cells out of your device and recharge them separately.
SKU: SH124 -
Cells And Cell Holder
4X AA Cell Holder Square Case Housing in Pakistan
This is a 4 x AA Battery Holder Box, Without Cover. The case box can keep your batteries organized and protected. The holder case is designed with leads for easy to solder and connect. This battery holder case is perfect for devices that need a 6V external battery.
SKU: SH128 -
Power Bank Kit
5V 1A Power Bank Charger Step Up Boost Charging Circuit Module Lithium Battery DIY Power Bank Module in Pakistan
Power Bank Kit5V 1A Power Bank Charger Step Up Boost Charging Circuit Module Lithium Battery DIY Power Bank Module in Pakistan
This is the mobile power module Accessories, 18650 Circuit board shell. Meet the individual needs of your DIY, but you must understand basic electronic assembly. The use of the positive B + and b-negative welding note cannot be canceled Batteries: polymer battery 18650 lithium battery cell phone battery Tablet battery MP3 battery can be connected to a lithium battery can also be connected in several sections of lithium batteries, as long as the voltage is 3.7-4.2 V in parallel,
SKU: SH106 -
Wires and cables
65pcs Jumper Wires Cable Male to Male Jumper Wire In Pakistan
These Flexible Breadboard Jumper Wires are Ideal for creating circuits between your microcontroller and the breadboard on the bots Reusable for fast build a prototype of an electronic circuit. Soldering is not required. This type of breadboard cable wire is the most preferred. Wires are flexible, durable, reusable, easy to trace, easy to connect, and disconnect. Quality projects deserve the use of this quality breadboard COMBO.
SKU: SH-250 -
Power Bank Case
8 Cells Dual USB Power Bank Case With LCD Display in Pakistan
ual USB Power Bank Case is a brand new and high-quality Case. This USB LCD power bank battery shell has an LED indicator, showing charging status and on/off status. This 18650 power bank battery box has an electricity-saving function. 8 x 18650 power bank case is the best environmentally friendly and economic efficiency. This wireless power bank case has two USB output for charge mobile phone, MP3, MP4, tablet2 LED light reminds stock energy.
SKU: SH105 -
Cells And Cell Holder
9 Volt Battery Double Charge Battery High Power In Pakistan
This is a General purpose 9V Double Charge Non-Rechargeable Battery for all your project and application needs. As we experienced the use of this battery in our testing lab for various purposes, we can assure you the best quality, long life, and genuineness of this battery among all options available in the market at this cost. Its Universal 9V battery size and connecting points. it is useful in many DIY projects as well as household applications and they can easily be replaced and installed.
SKU: SH-314 -
Cells And Cell Holder
9V Battery Power Plus Battery Heavy Duty In Pakistan
This is a General purpose 9V Power Plus Non-Rechargeable Battery for all your project and application needs. As we experienced the use of this battery in our testing lab for various purposes, we can assure you the best quality, long life, and genuineness of this battery among all options available in the market at this cost. Its Universal 9V battery size and connecting points. it is useful in many DIY projects as well as household applications and they can easily be replaced and installed.
SKU: SH-315 -
-
-
Electronic Devices And Components
Baleno Motor 12V DC High Speed Motor For Air cooler And Stand Fan In Pakistan
Electronic Devices And ComponentsBaleno Motor 12V DC High Speed Motor For Air cooler And Stand Fan In Pakistan
100% Original Copper Winding Baleno 12v Dc Motor Low noise, high speed, high efficiency, low resistance. Widely use for Air Cooler, Stand fans, Wall Fan, Pedestal Fan, And Table Fan. Solar Motor For Special Projects 2800-3000 RPM.
SKU: SH-243 -
BMS Circuit
Battery Protection Board 4S 20A 14.8V BMS For 18650 Lithium Ion Cells HX-4S-A20 in Pakistan
BMS CircuitBattery Protection Board 4S 20A 14.8V BMS For 18650 Lithium Ion Cells HX-4S-A20 in Pakistan
A battery management system (BMS) is an electronic regulator that monitors and controls the charging and discharging of rechargeable batteries. Battery BMS protection boards are the brains behind battery packs. 20A 4S BMS manages the output, charging, and discharging and also provides critical safeguards to protect the batteries from damage. 18650 protection circuit Board is a high-accuracy voltage detection circuit. The 20A protection board can be used for lithium-ion Phosphate batteries, Low power inverters, massager battery packs, electronics, LED light backup power supplies, solar street lights battery packs and many other products
SKU: SH117 -
Breadboard
Breadboard 830 Point Solderless PCB Bread Board MB-102
Breadboard Project Board MB102 Solder-less breadboard is commonly used by students and hobbyists to quickly assemble an electronics project without using soldering station. These Breadboard Project Board MB102 can be connected with one-another to make a larger board for complex projects.
SKU: SH205 -
Voltage Regulator Module
CC-CV XL4016 9A DC To DC Adjustable Buck Converter In Pakistan
The DC-DC Step-Down 9A XL4016 voltage converter has the function of delivering a constant output voltage lower than the input voltage against variations in the input or load voltage. It supports output currents of up to 9A, input voltage between 8V to 40V and output voltage between 1.25V to 36V. The output voltage is selected by a multiturn potentiometer.
SKU: SH55 -
Voltage Regulator Module
DC To DC 2A USB Charger 4.5-40V To 5V Step-down Buck Converter Voltmeter Module
Voltage Regulator ModuleDC To DC 2A USB Charger 4.5-40V To 5V Step-down Buck Converter Voltmeter Module
The Buck Regulator module converts an input of 4.5-40V into a very stable 5V 2A output. The Step-Down Voltmeter device features a USB port through which you can charge your phone. While charging your device please consider that the output of this device is regulated at 5V 2A. Simply connect this device to the power supply, the voltage can be detected in real-time. When you need the phone, IPAD, MP3, and other digital products to charge, click the “Output Enable” button, then the USB power indicator lights up and Variable Power Supply will start supplying 5V 2A at its output.
SKU: SH49 -
Voltage Regulator Module
DC3V- 6V To 400KV Boost Step-up Module High-Voltage Generator Arc Ignition Coil
Voltage Regulator ModuleDC3V- 6V To 400KV Boost Step-up Module High-Voltage Generator Arc Ignition Coil
DIY Stun Gun Module MC105 Pulse DC 3.6V-6V 400KV Boost Step Up Power Module High Voltage Generator Transformer High Voltage Converter uses the principle Tesla coil is made of high-voltage pulse output voltage. current, small size , high efficiency, simple external circuit ( just plug in the switch , the battery can be )
SKU: SH65 -
Power Bank Case
DIY 18650 Power Bank Case Single Cell in Pakistan
Fashion style, simple and fashionable design with colorful shell Smaller, lighter, portable Self-adaptive technique allows intelligent faster, safer charging Charging-in with USB cord(not included), or by charging the batteries with other chargers Strong compatibility for ipod, for iphone, for ipad, mobile, MP3, MP4, gameboy, PDA, GPS, etc.
SKU: SH101