DSN-VC288 Panel Mount DC 100V 10A Voltmeter Ammeter
This DC 100V 10A Ammeter Voltmeter is consist of 0.28 inch 5 wire red LED. With 100V DC can be measured by this meter with 0.1V resolution. This volt ammeter contains 2 wire harnesses. 2 poles with RED and BLACK lead used to provide power for the meters. this meter is portable and small in size. DSN-VC288 DC 100V 10A shows volt and ammeter at the same time on the same screen.
₨550
This DC 100V 10A Ammeter Voltmeter is consist of 0.28 inch 5 wire red LED. With 100V DC can be measured by this meter with 0.1V resolution. This volt ammeter contains 2 wire harnesses. 2 poles with RED and BLACK lead used to provide power for the meters. this meter is portable and small in size. DSN-VC288 DC 100V 10A shows volt and ammeter at the same time on the same screen.
Its operating voltages are 6 to 30 volts. This is a separate power supply that is isolated from the source, it is possible to use the same supply but it seems to affect the amp meter reading. 3 wire harness used for a ground. This 3rd wire harness connects directly to the battery or supply ground of the load. Get all types of Meters, Sensors, Modules
Specifications Of DSN-VC288 DC 100V 10A Voltmeter Ammeter:
- Voltage measurement range: 0.0V-100V
- Current test range: 0-999mA, 0-10A
- Power supply range: DC4-30.0V
- Voltage error: ±0.1%
- Current error: ±1%
- Working current: < 20mA
- Refresh rate: about 300mS once
- Display mode: double three-digit 0.28″ LED digital tube
- Display color: red + red, red + blue. Optional
- Lead length: 15cm
- Dimensions: 48 x 29 x 22 mm
- Mounting hole: 46 x 27 mm
- Working temperature: -10 ° C ~ 65 ° C
Based on 0 reviews
Be the first to review “DSN-VC288 Panel Mount DC 100V 10A Voltmeter Ammeter”
Related products
-
Instruments And Tools
Arduino Serial Printer Arduino Mini Embedded Receipt Thermal Printer With Paper Roll In Pakistan
Instruments And ToolsArduino Serial Printer Arduino Mini Embedded Receipt Thermal Printer With Paper Roll In Pakistan
Mini Thermal Receipt Printer Mini Embedded Receipt Thermal Printer is an embedded thermal printer, which is widely used in various occasions, such as supermarkets, convenience stores, post offices, banks and so on. This is an embedded thermal printer, which is widely used on various occasions, such as supermarkets, convenience stores, post offices, banks, and so on. It is not a normal consumer product, but similar to consumer products. The compact size makes it easy to be embedded in any kind of instrument and meter. With a nice appearance, you can even put it on the table. On the hardware side, we specially choose the TTL interface so that it can be directly controlled by development boards such as Arduino or Raspberry Pi. In the Internet of Things era, it’s time to print out your ideas!
SKU: SH-281 -
Instruments And Tools
EGS002 EG8010 + IR2113 Pure Sine Wave Inverter SPWM Module In Pakistan
- 5V single power supply
- 4 pin set of pure sine wave output frequency:
- 50Hz pure sine wave of fixed frequency of 60Hz pure sine wave of fixed frequency 0-100Hz
- pure sine wave frequency adjustable 0-400Hz pure sine wave frequency adjustable
- Unipolar and bipolar modulation
- 300nS dead time 500nS dead time 1.0uS dead time 1.5uS dead time
- External 12MHz crystal oscillator
- PWM carrier frequency 23.4KHz
- Voltage, current, real time temperature feedback
- Overvoltage, undervoltage, overcurrent and overheating protection
- Soft-start mode pin setting the response time of 1S
- Serial communication to set the output voltage, frequency and other parameters
- External Serial LCD Module 1602 displays the inverter
- voltage, frequency, temperature and current information
SKU: 298 -
Instruments And Tools
DC Gear Motor 6v TT Yellow Gear Motor Double Shaft
This gear motor is perfect for your next robotics project. This gear motor is ideal for robotic car or line-tracing robot. With plastic construction and colored in bright yellow, the DC gear motor measures approx. 2.5 inch long, 0.85 inch wide and 0.7 inch thick. The wheel can be mounted on either side and the Gearmotor works well between 4V to 7V (recommended 6 Volts). At a ratio of 1:48 you can get some really good torque at 5 Volts.
SKU: SH201
There are no reviews yet.